2 layers20.5 × 24.8 mm
2 layers
Ce projet de 2A à l'ENSEA consiste à construire une bataille navale où les capacités explosent lorsqu'un bateau est touché.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 8
- Pads
- 8
- Tracks, vias
- 0, 0
- Pours
- 1
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 15 Sep 2026
- Updated
- 3 Nov 2026
Overview
Broche is an open-source printed circuit board by Harolove, from the Harolove/Exploding_Battleship repository on GitHub. It is a 2-layer board with 8 parts on 8 nets.
README
README.mdExploding_Battleship
Ce projet de 2A à l'ENSEA consiste à construire une bataille navale où les capacités explosent lorsqu'un bateau est touché.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | Conn_01x01_Pin | Connector_Hirose:Hirose_DF63M-1P-3.96DSA_1x01_P3.96mm_Vertical | masse1, masse2, SDA1, SDA2, SDL1, SDL2, vcc1, vcc2 |
Questions
What parts does the Broche use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Broche KiCad files?
From the Harolove/Exploding_Battleship repository on GitHub, at the commit this page was made from: the board is test broche/broche/broche.kicad_pcb and its schematic Battleship/Battleship.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Broche design in my own project?
Its repository states no licence, so its author keeps all rights: ask Harolove before reusing the design.
Similar boards
- 2 layers14.4 × 10.5 mm
OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm
Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm
USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm
7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm
PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm
PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0