

Pro Micro UNO shield
- Size
- 68.6 × 63.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 120
- Nets
- 102
- Pads
- 457
- Tracks, vias
- 2,257, 394
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Mar 2018
- Updated
- 19 Oct 2025
Overview
Pro Micro UNO shield is an open-source printed circuit board by hanyazou, from the hanyazou/MyPCBs repository on GitHub. It is a 2-layer board of 68.6 × 63.5 mm with 120 parts on 102 nets, routed with 2,257 tracks and 394 vias.
It is built around the SN74LVC541ADBR. Its parts include 50 resistors, 50 diodes, 14 connectors, 3 ICs and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
120| Qty | Value | Footprint | References |
|---|---|---|---|
| 29 | 220R | Resistor_SMD:R_0603_1608Metric | R22, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32, R33, R34, R35, R36, R37 +13 |
| 24 | RED | LED_SMD:LED_0603_1608Metric | D26, D27, D28, D29, D30, D31, D32, D33, D34, D35, D36, D37, D38, D39, D40, D41 +8 |
| 21 | 220R | KiCAD footprints:R_0603_1608Metric | R1, R2, R3, R4, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21 +5 |
| 21 | BLUE | KiCAD footprints:LED_0603_1608Metric | D1, D2, D3, D4, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21 +5 |
| 3 | BLUE | LED_SMD:LED_0603_1608Metric | D22, D23, D24 |
| 3 | SN74LVC541ADBR | library:SN74LVC541ADBR | U1, U2, U3 |
| 2 | Arduino UNO | library:Arduino_Shield | J2, J2 |
| 2 | Conn_01x10_Male | KiCAD footprints:PinHeader_1x10_P2.54mm_Vertical | J3, J6 |
| 2 | PWR | LED_SMD:LED_0603_1608Metric | D25, D50 |
| 1 | Arduino_pro_micro | library:Arduino_pro_micro_0.85mm | J1 |
| 1 | Arduino_pro_micro WIDE | library:Arduino_pro_micro_WIDE-0.85mm | J5 |
| 1 | Conn_01x02_Male | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_01x02_Male | KiCAD footprints:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Grove GPIO | library:JST_PH_B4B-PH-K_04x2.00mm_Straight | J11 |
| 1 | Grove I2C | library:JST_PH_B4B-PH-K_04x2.00mm_Straight | J8 |
| 1 | Grove UART | library:JST_PH_B4B-PH-K_04x2.00mm_Straight | J10 |
| 1 | Qwiic I2c | library:Qwiic_I2C_1.00mm_4pin | J9 |
| 1 | Reset switch | library:push switch | SW1 |
| 1 | SPI connector | library:JST_SH_BM08B-SRSS-TB_08x1.00mm_Straight | J13 |
| 1 | SPI header | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J12 |
| 1 | SW_SPDT | library:mini_slide_switch | SW2 |
The 119 most common of 120 parts.
More from hanyazou/MyPCBs
12- 2 layers23 × 29 mm

- 2 layers34.7 × 17.8 mm

- 2 layers34.7 × 17.8 mm

- 2 layers35.1 × 17.8 mm

- 2 layers30.5 × 17.8 mm

- 2 layers50.8 × 58.4 mm

- 2 layers71.4 × 53.3 mm

- 2 layers30.5 × 17.8 mm

- 2 layers49.5 × 19 mm

- 2 layers50.8 × 22.9 mm

- 2 layers33 × 17.8 mm

- 2 layers14.6 × 9.9 mm

Similar boards
- 2 layers182.9 × 172.7 mm

- 2 layers281.7 × 95.6 mm

- 2 layers96.5 × 55 mm

- 2 layers163 × 137.5 mm

- 2 layers30 × 95 mm

IotThermalCamera
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.
120 parts94BSD-3-Clause - 2 layers227.7 × 112.8 mm

Wren universal
oliviahanley/wren-keyboard
A split ergonomic keyboard with options for numpad, nav cluster, and more.
120 parts93MIT - 2 layers84 × 69 mm

- 2 layers185.4 × 105.4 mm

Questions
How big is the Pro Micro UNO shield PCB?
It measures 68.6 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pro Micro UNO shield use?
120 parts, built around the SN74LVC541ADBR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pro Micro UNO shield KiCad files?
From the hanyazou/MyPCBs repository on GitHub, at the commit this page was made from: the board is KiCAD/Pro-Micro-UNO-shield/Pro-Micro-UNO-shield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pro Micro UNO shield design in my own project?
Its repository states no licence, so its author keeps all rights: ask hanyazou before reusing the design.