2 layers38.6 × 26.7 mm
2 layers60 × 90 mm
Pluggable
hannesweisbach/sensorbox- Size
- 60 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 39
- Pads
- 131
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 Oct 2025
- Updated
- 11 Oct 2025
Overview
Pluggable is an open-source printed circuit board by hannesweisbach, from the hannesweisbach/sensorbox repository on GitHub. It is a 2-layer board of 60 × 90 mm with 26 parts on 39 nets.
It is built around the PMS5003 and AMS1117-3.3. Its parts include 8 connectors, 6 capacitors, 3 resistors, 2 ICs and 1 transistor.
Main components
2PMS5003
--10℃~+60℃ 100mA 4.5V~5.5V 50mm Digital general particulate matter concentration sensor Low power mode Serial port - Sensor Modules ROHSBeijing PlantowerSensor Modules
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5 |
| 2 | 10 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 22u | Capacitor_Tantalum_SMD:CP_EIA-1608-08_AVX-J | C6 |
| 1 | AHT20+BMP280 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Horizontal | J2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | BACKLIGHT | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J6 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | DISPLAY | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J7 |
| 1 | PMS5003 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J5 |
| 1 | Q_PMOS_DGS | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SCD40 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Horizontal | J8 |
| 1 | SGP-30 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Horizontal | J3 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1 |
| 1 | ZE08 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J4 |
| 1 | ~ | pluggable:ESP32-S2-MINI Through Board Mount | U1 |
The 21 most common of 26 parts.
Questions
How big is the Pluggable PCB?
It measures 60 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pluggable use?
26 parts, built around the PMS5003 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pluggable KiCad files?
From the hannesweisbach/sensorbox repository on GitHub, at the commit this page was made from: the board is eda/pluggable/pluggable.kicad_pcb and its schematic eda/pluggable/pluggable.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pluggable design in my own project?
Its repository states no licence, so its author keeps all rights: ask hannesweisbach before reusing the design.
Similar boards
- 2 layers65 × 64 mm
- 4 layers74 × 56 mm
Atmos
HearnChristian/atmos-sense
ESP32-based atmospheric sensing node: BME280 environmental sensing and AS3935 lightning detection over I2C, designed for drone integration. KiCad hardware plus firmware.
73 parts1MIT - 2 layers85.5 × 79 mm
- 2 layers45 × 30 mm
- 2 layers56 × 58 mm
Weather station
Dhruv2212-star/weather-station
A Complete working model of a small but usefull weather station made at home with custom PCB and Casings to give it a unique look!
22 parts - 2 layers37.4 × 54.6 mm
AirAware
evanloi/air-aware
AirAware is a portable air quality monitor built with an ESP32-C3 and PMS5003 to measure particulate matter and support hands-on air quality education.
16 partsMIT - 2 layers75 × 90 mm
Weather station
maxr777/weather-station
Reads temperature, humidity, and pressure via a BME280 over I2C, monitors air quality with a PMS5003 over UART, and displays everything on an SH1106 OLED. A few diagnostic LEDs signal hardware faults on startup.
20 parts