2 layers70.1 × 43.2 mm
Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396
2 layers13 × 11 mm
Sensor node bme280
hannes-hochreiner/sensor-node-bme280A breakout board for the sensor-node featuring the BME280
- Size
- 13 × 11 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 6
- Nets
- 4
- Pads
- 26
- Tracks, vias
- 49, 5
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Nov 2018
- Updated
- 27 Jan 2019
Overview
Sensor node bme280 is an open-source printed circuit board by hannes-hochreiner, from the hannes-hochreiner/sensor-node-bme280 repository on GitHub, published under the MIT licence. It is a 2-layer board of 13 × 11 mm with 6 parts on 4 nets, routed with 49 tracks and 5 vias.
It is built around the BME280. Its parts include 2 capacitors and 2 resistors. It belongs with the home automation and IoT and sensors and measurement boards of this library.
Main components
1README
README.md
Sensor node BME280
A breakout board for the sensor node core featuring the BME280.
Main parts
BME280
- Bosch Sensortec: BME280
- Digi-Key: 828-1063-1-ND
- Datasheet
- Driver
- Price: 6.61
Connector
- Sullins Connector Solutions: GRPB052VWVN-RC
- Digi-Key: S9015E-05-ND
- Datasheet
- Price: 0.63
Price
estimate: 10 EUR
Size
11 mm x 13 mm (connector 2.25 mm in)
Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1µF | official stable:C_0603_1608Metric | C1, C2 |
| 2 | 10k | official stable:R_0603_1608Metric | R1, R2 |
| 1 | BME280 | sensor-node-bme280:BME280_handsolder | B1 |
| 1 | Sensor-Connector | sensor-node-bme280:sensor-connector-male | SC1 |
Questions
How big is the Sensor node bme280 PCB?
It measures 13 × 11 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sensor node bme280 use?
6 parts, built around the BME280. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sensor node bme280 KiCad files?
From the hannes-hochreiner/sensor-node-bme280 repository on GitHub, at the commit this page was made from: the board is kicad/sensor-node-bme280/sensor-node-bme280.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sensor node bme280 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers38.6 × 39.5 mm
- 4 layers35.1 × 76.3 mm
Tiny4FSK
New-England-Weather-Balloon-Society/Tiny4FSK
Horus Binary v2 HAB Tracker
90 parts96CERN-OHL-W-2.0 - 2 layers29.8 × 33.7 mm
- 2 layers136 × 100 mm
ClimateSprinklerController
kbx81/ClimateSprinklerController
ESP32-based climate and sprinkler controller for use with ESPHome
194 parts56 - 4 layers36.6 × 60.3 mm
StratoSoar MK3.0
crnicholson/StratoSoar-MK3
StratoSoar MK3, an autonomous glider meant for high-altitudes, accessible to everyone
85 parts43 - 2 layers23 × 50 mm
- 2 layers97 × 77.5 mm
ESPlant
CCHS-Melbourne/ESPlant
Environmental Sensor Plant - solar WiFi gardening/meteorological sensor using ESP8266
77 parts37