2 layers74 × 45 mm
4 layers72.7 × 73.3 mm
- Size
- 72.7 × 73.3 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 46
- Nets
- 72
- Pads
- 208
- Tracks, vias
- 456, 116
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 9 Jul 2023
- Updated
- 9 Jul 2023
Overview
FC V1 is an open-source printed circuit board by hamzaaldabe, from the hamzaaldabe/Graduation_Project repository on GitHub. It is a 4-layer board of 72.7 × 73.3 mm with 46 parts on 72 nets, routed with 456 tracks and 116 vias.
It is built around the MPU-6000 and BAT54C. Its parts include 15 capacitors, 5 connectors, 4 ICs, 3 diodes and 2 resistors. It belongs with the STM32 boards of this library.
Main components
2
MPU-6000
QFN-24-EP(4x4)-40℃~+85℃ 16bit 1KB 2.375V~3.46V 5uA IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps 运动事件检测、同步与时间戳、过量程保护功能 QFN-24-EP(4x4) Accelerometers ROHSTDK InvenSenseAccelerometers
BAT54C
SOT-231 Pair Common Cathode 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-23 Schottky Diodes ROHSNexperiaSchottky Diodes
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nf | Capacitor_Tantalum_SMD:CP_EIA-6032-15_Kemet-U | C1_VCAP1, C1_VDD1, C2_VCAP1, C2_VDD1, C3_VDD1, C4_VDD1, C5_VDD1 |
| 6 | 10Kohm | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R_BOOT0, R_BOOT1, R_RESET1, R1_IMU1, R3_USB1, R4_USB1 |
| 4 | 10uf | Capacitor_Tantalum_SMD:CP_EIA-6032-15_Kemet-U | C1_VIN1, C1_VREG1, C2_VIN1, C2_VREG1 |
| 4 | Conn_01x04_Male | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | J2, J3, J4, J5 |
| 3 | 0.1uf | Capacitor_Tantalum_SMD:CP_EIA-6032-15_Kemet-U | C1_IMU1, C1_RESET1, C3_IMU1 |
| 3 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW_BOOT0, SW_BOOT1, SW_RESET1 |
| 3 | TestPoint_Pad_3.0x3.0mm | TestPoint:TestPoint_Pad_3.0x3.0mm | BATV, CURRENT, RSSI |
| 2 | 1Kohm | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R_LED1, R_LED2 |
| 2 | 22ohm | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R1_USB1, R2_USB1 |
| 2 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2, D3 |
| 2 | SolderWirePad_1x01_SMD_5x10mm | Connector_Wire:SolderWirePad_1x01_SMD_5x10mm | GND, VIN |
| 1 | 2.2uf | Capacitor_Tantalum_SMD:CP_EIA-6032-15_Kemet-U | C2_IMU1 |
| 1 | 8MHZ | Crystal:Crystal_DS26_D2.0mm_L6.0mm_Horizontal_1EP_style2 | Y1 |
| 1 | BAT54C | Package_TO_SOT_SMD:SOT-23 | D1 |
| 1 | MPU-6000 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U2 |
| 1 | NCP1117-3.3_TO252 | Package_TO_SOT_SMD:TO-252-2 | U1 |
| 1 | NCP1117-5.0_TO252 | Package_TO_SOT_SMD:TO-252-2 | U4 |
| 1 | STM32F415RGTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521 | J1 |
Questions
How big is the FC V1 PCB?
It measures 72.7 × 73.3 mm and has 4 copper layers, 4.69 mm thick.
What parts does the FC V1 use?
46 parts, built around the MPU-6000 and BAT54C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FC V1 KiCad files?
From the hamzaaldabe/Graduation_Project repository on GitHub, at the commit this page was made from: the board is FC_V1/FC_V1.kicad_pcb and its schematic FC_V1/FC_V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FC V1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask hamzaaldabe before reusing the design.
Similar boards
- 6 layers36 × 36 mm
- 2 layers47.9 × 41.5 mm
- 2 layers190 × 190 mm
- 4 layers50.5 × 36 mm
FMU v171-imported
yagamy4680/drone-study
AUAV-OpenSource/FMUv4-PixRacer is the open hardware design of PixHawk FMUv4. It uses STM32F427 and MPU6000. (github)
118 parts - 4 layers40 × 40 mm
- 4 layers47.5 × 62 mm
- 4 layers36 × 36 mm
