

Twinkletwinkie
TwinkleTwinkie SAO
- Size
- 64 × 31.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 26
- Pads
- 57
- Tracks, vias
- 81, 5
- Pours
- 23
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Aug 2019
- Updated
- 23 Aug 2019
Overview
Twinkletwinkie is an open-source printed circuit board by hamster, from the hamster/twinkletwinkie repository on GitHub, published under the MIT licence. It is a 2-layer board of 64 × 31.2 mm with 21 parts on 26 nets, routed with 81 tracks and 5 vias.
It is built around the ATTINY816-MN. Its parts include 4 resistors, 3 diodes, 1 capacitor, 1 IC and 1 crystal. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.md#TwinkleTwinkie SAO
For fun, I made a twinkling twinkie SAO for my friend @mrtwinkletwink for defcon27.
It is based on an attiny1616, has 3 LEDs and one big capacitive touch button.
- PDF version is here


Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 33R | Resistor_SMD:R_0603_1608Metric | R4, R5, R6 |
| 3 | LED | lib_fp:LED-0805 | D1, D2, D3 |
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP8 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | ATtiny816-M | Package_DFN_QFN:VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm | U1 |
| 1 | Badgelife_sao_connector_v169bis | lib_fp:Badgelife-Shitty-v1.69bis | X1 |
| 1 | C | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | LOGO | lib_fp:back-silk | G*** |
| 1 | LOGO | lib_fp:copper | G*** |
| 1 | LOGO | lib_fp:silkscreen | G*** |
| 1 | PB0 | TestPoint:TestPoint_Pad_2.0x2.0mm | PB0 |
| 1 | PB2 | TestPoint:TestPoint_Pad_2.0x2.0mm | 3V3 |
| 1 | PB3 | TestPoint:TestPoint_Pad_2.0x2.0mm | GND |
| 1 | PC0 | TestPoint:TestPoint_Pad_2.0x2.0mm | PC0 |
| 1 | PC1 | TestPoint:TestPoint_Pad_2.0x2.0mm | PC1 |
| 1 | PC2 | TestPoint:TestPoint_Pad_2.0x2.0mm | PC2 |
Similar boards
- 2 layers12 × 21 mm

- 2 layers25.5 × 35 mm

- 2 layers41 × 55.4 mm

- 2 layers38 × 24 mm

BMS
SMalasGit/2s-BMS
A repository for a 2s lithium ion BMS that utilizes the BQ28Z620. This IC is an all-in-one chip that features battery protection, cell balancing, battery charging, battery current and voltage monitoring, and gas gauging…
82 parts2 - 2 layers8 × 11 mm

- 2 layers

- 2 layers83.9 × 83.9 mm

Microbadge panelized 8x8
Pips801/microbadge
Do you find Minibadges too big? Do you want to go even smaller? Try out the Microbadge! A minibadge can hold 4 of them!
2,332 parts1 - 2 layers13.9 × 21 mm

Questions
How big is the Twinkletwinkie PCB?
It measures 64 × 31.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Twinkletwinkie use?
21 parts, built around the ATTINY816-MN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Twinkletwinkie KiCad files?
From the hamster/twinkletwinkie repository on GitHub, at the commit this page was made from: the board is twinkletwinkie.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Twinkletwinkie design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).