2 layers32.2 × 28.5 mm
2 layers53.4 × 68.6 mm
DC801 Shield
hamster/classroom4Classes I have developed
- Size
- 53.4 × 68.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 135
- Nets
- 45
- Pads
- 202
- Tracks, vias
- 209, 18
- Pours
- 25
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 Dec 2017
- Updated
- 23 Oct 2025
Overview
DC801 Shield is an open-source printed circuit board by hamster, from the hamster/classroom repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 53.4 × 68.6 mm with 135 parts on 45 nets, routed with 209 tracks and 18 vias.
Its parts include 10 resistors, 6 diodes and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
Firmware102/Hardware/DC801 Shield/README.mdDC801 Arduino Shield
BOM
Prices/sourcing as of 2/2018
| Item | Part Number | Sourcing | Cost Each (100 unit pricing) | Needed per kit | Total |
|---|---|---|---|---|---|
| PCB | 100 qty, black silkscreen | seeed | 1 | ||
| SW1,2 | TL3305AF260QG | digikey | 0.16550 | 2 | 0.33 |
| D1,2 | CLV1L-FKB-CHMMQEHBB7673673 | digikey | 0.30360 | 2 | 0.60 |
| D3-6 | 150080YS75000 | digikey | 0.13700 | 4 | 0.55 |
| R1-10 | RC0805JR-07150RL | digikey | 0.00760 | 10 | 0.08 |
| Headers | 1x10, 2x8, 1x6 | ||||
| Total | Per each board kit | $1.56 |
Parts
135| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 150 | Resistors_SMD:R_0805 | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10 |
| 4 | LED | LEDs:LED_0805 | D3, D4, D5, D6 |
| 2 | LED_RABG | LEDs:LED_Cree-PLCC4_3.2x2.8mm_CCW | D1, D2 |
| 2 | SW_Push | lib_fp:TL3305_Switch | SW1, SW2 |
| 1 | Arduino_Uno_Shield | Arduino:Arduino_Uno_Shield | XA1 |
The 19 most common of 135 parts.
More from hamster/classroom
1Similar boards
- 2 layers191 × 85 mm
Sub panel
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
135 parts3kApache-2.0 - 2 layers95.3 × 161.9 mm
- 2 layers97.2 × 58.9 mm
- 2 layers53.5 × 101.8 mm
Sony scopeman
lucysrausch/sony-scopeman
Hardware Design files of a replacement mainboard for the Sony Watchman FD-10. This turns it into a bluetooth and WiFi-enabled vector display.
135 parts69 - 2 layers215.9 × 101.6 mm
- 2 layers76 × 76 mm
Sk030-matrix
mirdej/synkie
The Synkie is a modular open source analog video processor, developed by Michael Egger, Max Egger and Flo Kaufmann
135 parts47 - 2 layers270.1 × 112.9 mm
Hotreus62
beekeeb/hotreus62
Hotreus62 - an open-source 60% ergonomic mechanical keyboard with hotswap MX and choc support
135 parts38GPL-3.0 - 2 layers63.1 × 36 mm
Signal processing
MarcinWachowiak/semiconductor-radiation-detector
Semiconductor Radiation Detector - pcb, schematics, simulation files
135 parts33
Questions
How big is the DC801 Shield PCB?
It measures 53.4 × 68.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DC801 Shield use?
135 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DC801 Shield KiCad files?
From the hamster/classroom repository on GitHub, at the commit this page was made from: the board is Firmware102/Hardware/DC801 Shield/DC801 Shield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DC801 Shield design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).