2 layers70 × 45 mm
2 layers60 × 62 mm
Power monitor
Hal9k-dk/Access-SystemFiles for the different parts of Hal9ks access systems for different tools.
- Size
- 60 × 62 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 17
- Pads
- 72
- Tracks, vias
- 173, 16
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Apr 2018
- Updated
- 16 Apr 2018
Overview
Power monitor is an open-source printed circuit board by Hal9k-dk, from the Hal9k-dk/Access-System repository on GitHub. It is a 2-layer board of 60 × 62 mm with 21 parts on 17 nets, routed with 173 tracks and 16 vias.
It is built around the HLK-PM01, FDN339AN and G2RL-2A-DC5, with the WS2812 among its other parts. Its parts include 5 connectors, 3 resistors, 2 ICs, 1 capacitor and 1 diode. It belongs with the ESP8266 boards of this library.
Main components
4
HLK-PM01
DIP,34x24mm0.1W 100mVp-p 15mm 20mm 34mm 3W 3kV 5V 700mA 73% 85VAC~265VAC AC-DC Short Circuit Protection、Over Current Protection、Fault self-recovery ±0.2% 插件,34x20mm AC-DC Power Modules ROHSHI-LINKAC-DC Power Modules
FDN339AN
SOT-23-55℃~+150℃ 1 N-channel 120pF 1V 1W 20V 25mΩ@4.5V 300pF 4nC@4.5V 5.5A 80pF SOT-23 MOSFETs ROHSTECH PUBLICMOSFETs
G2RL-2A-DC5
8A@250VAC, DPDT Power Relay, G2RL-2A SeriesOMRON ELECTRONICUncategorised
WS2812
SMD5050-4P1.57mm 1000mcd 110mcd 120us 2kHz 3.7V~5.3V 300ns 320mcd 451nm 523nm 5mm 5mm 623nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit Top-mount SMD5050-4P RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)
README
power_monitor/readme.mdPower monitoring acces system
A module based on AndersV209s work on the Wemos D1 Mini based boards. Main changes are:
- DPST relay that breaks both Live and Neutral and handles 8A
- ACS723 10A current monitoring chip
The changes have been done to support use on 3D printers, or other machines where the user won't be expected to leave their key FOB in the device, and where the board can then determine end of use when power draw drops significantly
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad0.84x1.00mm_HandSolder | C1 |
| 1 | 15K | Resistor_SMD:R_0603_1608Metric_Pad0.84x1.00mm_HandSolder | R3 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric_Pad0.84x1.00mm_HandSolder | R1 |
| 1 | 1N4001 | Diode_SMD:D_SMA_Handsoldering | D1 |
| 1 | 230V AC Input | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G_1x02_P5.00mm_Horizontal | J1 |
| 1 | 230V AC Output | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G_1x02_P5.00mm_Horizontal | J2 |
| 1 | 6K8 | Resistor_SMD:R_0603_1608Metric_Pad0.84x1.00mm_HandSolder | R2 |
| 1 | ACS723xMATR-10AB | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | BW_SEL | Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
| 1 | FDN339AN | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
| 1 | G2RL-2A-DC5 | Relay_THT:Relay_DPST_Schrack-RT2-FormA_RM5mm | K1 |
| 1 | HLK-PM01 | Converter_ACDC:HLK-PM01 | PS1 |
| 1 | OLED | Connector_Phoenix_MC:PhoenixContact_MC_1,5_4-G-3.81_1x04_P3.81mm_Horizontal | J4 |
| 1 | RFID | Connector_Phoenix_MC:PhoenixContact_MC_1,5_4-G-3.81_1x04_P3.81mm_Horizontal | J3 |
| 1 | WS2812 | Connector_Phoenix_MC:PhoenixContact_MC_1,5_3-G-3.81_1x03_P3.81mm_Horizontal | J5 |
| 1 | Wemos-D1-mini | RF_Module:Wemos D1 Mini | U1 |
The 16 most common of 21 parts.
Questions
How big is the Power monitor PCB?
It measures 60 × 62 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Power monitor use?
21 parts, built around the HLK-PM01, FDN339AN, G2RL-2A-DC5 and WS2812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power monitor KiCad files?
From the Hal9k-dk/Access-System repository on GitHub, at the commit this page was made from: the board is power_monitor/power_monitor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power monitor design in my own project?
Its repository states no licence, so its author keeps all rights: ask Hal9k-dk before reusing the design.
Similar boards
- 4 layers65 × 52 mm
ProtogenControllerV1
coelacant1/Protogen-Electronics
SmartMatrix SmartLED Shield breakout for Protogen hardware
77 parts8GPL-3.0 - 2 layers17.8 × 52 mm
Kicad project
Duckle29/Dual-optical-endstop
A board with dual optical endstops, meant to allow for greater homing speeds for large machines
16 parts1 - 2 layers86.7 × 97.3 mm
Pulsr panel
Duckle29/pulsr
A simple tiny PCB for handling the high peak currents of periodically firing a solenoid
231 parts1MIT - 2 layers46 × 20 mm
- 2 layers86.4 × 41.9 mm
Rpi shutdown v0
Duckle29/RPi-power-controller
A power controller board, meant to softly shutdown a raspberry pi, before removing power completely from a machine.
19 partsMIT - 2 layers30 × 62 mm
- 2 layers88 × 53 mm
