2 layers80.2 × 106.3 mm
Ecsc21-badge
badgeteam/ecsc21-badge-public
Hardware design files for the ENISA ECSC21 badge (software coming later)
84 parts1MIT
4 layers192 × 48 mm
Cz19-badge
hackzone/cz19-badge6Event badge for CampZone 2019
- Size
- 192 × 48 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 341
- Nets
- 167
- Pads
- 1,438
- Tracks, vias
- 6,278, 578
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Feb 2019
- Updated
- 24 Dec 2022
Overview
Cz19-badge is an open-source printed circuit board by hackzone, from the hackzone/cz19-badge repository on GitHub, published under the MIT licence. It is a 4-layer board of 192 × 48 mm with 341 parts on 167 nets, routed with 6,278 tracks and 578 vias.
It is built around the CH340C, ESP32-WROOM-32D and SM16106SC, with the TC7258E, TP4056 and XC6206P332PR among its other parts. Its parts include 260 diodes, 36 resistors, 12 ICs, 9 transistors and 7 capacitors. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Main components
6
CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
ESP32-WROOM-32D
-- WiFi Modules ROHSEspressif SystemsWiFi Modules
SM16106SC
QSOP-24QSOP-24 LED Drivers ROHSShenzhen Sunmoon MicroLED DriversTC7258E
SOP-16-40℃~+85℃ 1mA Built-in auto blanking、LED fault crosstalk elimination SOP-16 Digital Tube Drivers ROHSShenzhen Fuman ElecLED Drivers
TP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery Management
XC6206P332PR
SOT-89-3-25℃~+80℃ 1 160mV@(50mA) 250mA 3.3V 40dB@(1kHz) 7uA 8V Fixed Over Current Protection、Short Circuit Protection Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSUMWVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdcz19-badge
Event badge for CampZone 2019
Parts
341| Qty | Value | Footprint | References |
|---|---|---|---|
| 256 | LL-R3528RGBC-008-B | LED_SMD:LED_Cree-PLCC4_3.2x2.8mm_CCW | D1, D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112 +240 |
| 23 | 10k | Resistor_SMD:R_0603_1608Metric | R11, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29 +7 |
| 9 | AO3400 (A09T) | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9 |
| 7 | 470 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R35 |
| 6 | SM16106SC | Package_SO:QSOP-24_3.9x8.7mm_P0.635mm | U1, U2, U3, U4, U5, U6 |
| 6 | SW_Push | Button_Switch_SMD:SW_SPST_B3S-1000 | SW1, SW2, SW3, SW4, SW5, SW6 |
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C7 |
| 5 | 1k2 | Resistor_SMD:R_0603_1608Metric | R9, R10, R12, R13, R14 |
| 4 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1mm | FID1, FID2, FID3, FID4 |
| 2 | GREEN | LED_SMD:LED_0603_1608Metric | D258, D260 |
| 1 | 100uf | Capacitor_SMD:C_Elec_4x5.8 | C6 |
| 1 | 10uf | Capacitor_SMD:C_1206_3216Metric | C5 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R36 |
| 1 | BLUE | LED_SMD:LED_0603_1608Metric | D257 |
| 1 | Battery | LiPoHolder:BatteryHolder_Keystone_1042_1x18650 | BT1 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U8 |
| 1 | Conn_02x03_Counter_Clockwise | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical_SMD | J2 |
| 1 | DW-01 | Package_TO_SOT_SMD:SOT-23-6 | U12 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32 | U11 |
| 1 | Hook1 | TestPoint:TestPoint_Keystone_5019_Minature | J3 |
| 1 | Hook2 | TestPoint:TestPoint_Keystone_5019_Minature | J4 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D259 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP2 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | TC7258E | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U7 |
| 1 | TP4056 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.35x2.35mm | U9 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex_47346-0001 | J1 |
| 1 | XC6206P332PR | Package_TO_SOT_SMD:SOT-89-3 | U10 |
Questions
How big is the Cz19-badge PCB?
It measures 192 × 48 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Cz19-badge use?
341 parts, built around the CH340C, ESP32-WROOM-32D, SM16106SC and TC7258E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cz19-badge KiCad files?
From the hackzone/cz19-badge repository on GitHub, at the commit this page was made from: the board is cz19-badge-hardware/cz19-badge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cz19-badge design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers100 × 110 mm
Cz badge hardware
hackzone/cz20-badge
Node.js build static site for using with Hatchery over WebUSB
185 parts13 - 4 layers406 × 27.5 mm
- 2 layers171 × 50.5 mm
Ctrl M
nuess0r/ctrl-M
Replacement controller for the famous IBM Model M keyboard based on the STM32F072 microcontroller. Supported by QMK.
39 parts20 - 2 layers80 × 50 mm
- 2 layers208 × 58 mm
- 2 layers82 × 36.5 mm
- 2 layers100 × 100 mm
