2 layers100 × 87 mm
Bertha main
Hackuarium/bioreactor
Please refer to the documentation for all useful information.
159 parts7
2 layers35.6 × 35.6 mm
LoadCell
Hackuarium/bioreactor7Please refer to the documentation for all useful information.
- Size
- 35.6 × 35.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 5
- Pads
- 21
- Tracks, vias
- 41, 12
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20200909)
- Created
- 10 Jan 2020
- Updated
- 17 Nov 2022
Overview
LoadCell is an open-source printed circuit board by Hackuarium, from the Hackuarium/bioreactor repository on GitHub. It is a 2-layer board of 35.6 × 35.6 mm with 8 parts on 5 nets, routed with 41 tracks and 12 vias.
It belongs with the sensors and measurement boards of this library.
README
README.mdbioreactor
Please refer to the documentation for all useful information.
Cloning the project
This project uses SUBMODULES.
In order to clone it use:
git clone --recurse-submodules https://github.com/Hackuarium/bioreactor.git
Pull and update submodules
You should run this commande every time you want to pull:
git pull --recurse-submodules
Submodules update only
To update the submodules:
git submodule update --recursive --remote
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Left | J1, J2, J3 |
| 1 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
Questions
How big is the LoadCell PCB?
It measures 35.6 × 35.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LoadCell use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LoadCell KiCad files?
From the Hackuarium/bioreactor repository on GitHub, at the commit this page was made from: the board is pcb/loadCell/loadCell.kicad_pcb and its schematic pcb/loadCell/loadCell.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LoadCell design in my own project?
Its repository states no licence, so its author keeps all rights: ask Hackuarium before reusing the design.
More from Hackuarium/bioreactor
1Similar boards
- 2 layers20.5 × 24.8 mm
- 2 layers14.4 × 10.5 mm
OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm
Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm
USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm
7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm
PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm
PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0