

Pokeys adapter
Interface boards for CNC control panel
- Size
- 24.1 × 62.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 39
- Pads
- 104
- Tracks, vias
- 197, 23
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 26 Sep 2020
- Updated
- 6 Mar 2022
Overview
Pokeys adapter is an open-source printed circuit board by hacklab-lahti, from the hacklab-lahti/cnc-panel repository on GitHub. It is a 2-layer board of 24.1 × 62.9 mm with 22 parts on 39 nets, routed with 197 tracks and 23 vias.
It is built around the MIC5504-3.3YM5 and PMEG3020BER. Its parts include 8 resistors, 6 connectors, 4 capacitors, 2 ICs and 1 diode. It belongs with the interfaces and adapters boards of this library.
Main components
2MIC5504-3.3YM5
SOT-23-5-40℃~+125℃@(Tj) 1 120uVrms 15uA 180mV@(300mA) 3.3V 300mA 5.5V 75dB@(1kHz) Fixed Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsPMEG3020BER
SOD-123W1 Independent 2A 30V 50A 50uA@30V 520mV@2A SOD-123W Schottky Diodes ROHSNexperiaSchottky Diodes
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 |
| 2 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | PinHeader_01x12 | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J2, J3 |
| 1 | 22-27-2051 | Project:HDRV5W64P0X254_1X5_1270X580X1205P | J1 |
| 1 | Bus | Project:IDC-Header_2x12_P2.54mm_Vertical_2 | J5 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | MIC5504-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | PMEG3020BER | Diode_SMD:Nexperia_CFP3_SOD-123W | D1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J6 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP1 |
| 1 | TXU0304PWR | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | IC1 |
More from hacklab-lahti/cnc-panel
1- 2 layers71.1 × 45.1 mm

Similar boards
- 8 layers117.3 × 121.3 mm

FPGA dev board
LZajmi/Artix-7-FPGA-Dev-Board
This repository contains the design files for the custom Artix-7 XC7A100T-FGG484 FPGA development board. This board is built for high-performance applications such as hardware acceleration, video processing, data…
366 parts3 - 2 layers120 × 100 mm

- 2 layers172 × 152.9 mm

- 2 layers22.9 × 36.7 mm

Usb2usb
tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware
26 parts152 - 2 layers78 × 130 mm

Lofence
kiu/lofence
LoFence is a LoRaWAN capable IoT electric fence monitoring system running on the The Things Network.
65 parts142MIT - 2 layers96.5 × 55 mm

- 2 layers120 × 130 mm

SingularitySurfer V1
nkrackow/SingularitySurfer-FPGA-Lock-In-Amplifier
Repository for the development of an FPGA based DSP Lock-In Amplifier
174 parts80MIT - 4 layers60.2 × 20.8 mm

PhaseLatchMini
AndersBNielsen/PhaseLatchMini
High-rate continuous streaming of interleaved dual ADC (I/Q) samples over USB Full‑Speed (FS) using only the built‑in CDC class on an STM32F103C8 ("Blue Pill" style) board.
63 parts72
Questions
How big is the Pokeys adapter PCB?
It measures 24.1 × 62.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pokeys adapter use?
22 parts, built around the MIC5504-3.3YM5 and PMEG3020BER. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pokeys adapter KiCad files?
From the hacklab-lahti/cnc-panel repository on GitHub, at the commit this page was made from: the board is pokeys-adapter/pokeys-adapter.kicad_pcb and its schematic pokeys-adapter/pokeys-adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pokeys adapter design in my own project?
Its repository states no licence, so its author keeps all rights: ask hacklab-lahti before reusing the design.