4 layers86.2 × 56.2 mm
4 layers86.2 × 56.2 mm
Tea Cup TInker board project
- Size
- 86.2 × 56.2 mm
- Copper layers
- 4
- Thickness
- 1.58 mm
- Parts
- 95
- Nets
- 85
- Pads
- 404
- Tracks, vias
- 1,151, 219
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 24 Mar 2023
- Updated
- 2 Jun 2023
Overview
Teacup is an open-source printed circuit board by HackerComputerCompany, from the HackerComputerCompany/teacup repository on GitHub, published under the GPL-2.0 licence. It is a 4-layer board of 86.2 × 56.2 mm with 95 parts on 85 nets, routed with 1,151 tracks and 219 vias.
It is built around the T31ZX, W25Q32JVSSIQ and AZ1117IH-3.3TRG1, with the NX2016SA-24MHZ-EXS00A-CS07553, PESD5V0U2BT,215-JSM and SFW15R-2STE1LF among its other parts. Its parts include 43 capacitors, 22 resistors, 8 connectors, 6 ICs and 1 diode.
Main components
6
T31ZX
QFN-88(9x9)1.5GHz QFN-88(9x9) Microcontrollers (MCU/MPU/SOC) ROHSISSIMicrocontrollers (MCU/MPU/SOC)
W25Q32JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 133MHz 1uA 2.7V~3.6V 20 Years 32Mbit 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
AZ1117IH-3.3TRG1
SOT-223-40℃~+125℃@(Tj) 1 1.3V@(0.8A) 15V 3.3V 4mA 70dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedUncategorised
NX2016SA-24MHZ-EXS00A-CS07553
SMD2016-4PCrystalsNDK
PESD5V0U2BT,215-JSM
SOT-23100nA 2 20A@8/20us 20V 350W@8/20us 39pF 5V 8.3V ESD IEC 61000-4-2 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSJSMSEMIUncategorised
SFW15R-2STE1LF
SMD,P=1mm,卧贴-55℃~+105℃ 0.3mm 15P 1mm 2.7mm Phosphor bronze Slide Lock Surface Mount, Right Angle Tin Top Contact SMD,P=1mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSAmphenolFFC, FPC (Flat Flexible) Connector Assemblies
README
README.mdTea Cup Tinker Board
The Tea Cup is a Tinker Board built on the Ingenic T31 MIPS CPU, which is specialised for Video & Audio Applications, and has highly integrated support for multiple interfaces, LCD's, SD Card, Ethernet and more.
Designed with the community in mind, the Tea Cup is going to be ideal for Kids, Tweens and Teens, and adults alike, to tinker with hardware and software inside of an interface designed with ease-of-use and simplicity, but never locking the user down to a limited API or enviroment.
This project is currently in alpha, with a small team working on it, you can join our commuinty Discord Server
RevA Board Pictures
Tools We Use
All of the work we are doing on Tea Cup, and any future projects are strictly open-source only whenever possible, This means we do not distrubiute any CAD, Code, Docs, or any other files in any format that is not an open-source, Free or FOSS Package, this is to ensure anyone can join development, and use our work in their own endevours.
Having this in mind, the tools we are using in this project are:
- FreeCAD
- KiCad
- binwalk
- Ghidra
- GIMP
Currently Working on:
- Getting an up-to-date SDK from ingenic
- Compiling uboot and attempting to create our own kernel with outdated SDK
- PCB Design for REV-A
- Testing differences between T31 Series and other Ingenic CPUs
- Finding a reliable and cheap method to get ICs from existing products
- Getting source for bulk order of T31's
Have finished:
- REV-A Roadmap
- Compiled and ran code on the host device
- Reverse engineering of the "$1 webcam" PCB, with full Serial comms
- binwalk'd "$1 webcam" Firmware and working on Reverse Engineering
- Discord Server with management and co-ordination systems
Long Term TODO
- Check out the master Teacup project board
External links
Thanks
To everyone who has worked with us on Tea Cup, we thank you sincerely. It has been, and will continue to be an honour working with you.
Thank you so much to the core-dev team for your continued work and effort with us on Tea Cup, without you this would have been impossible.
Thank you
LICENCE
This project is under the GPL2.0 Licence. See LICENCE for more information.
(c) 2023 HomesteadHacker
Parts
95| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 100nF | Capacitor_SMD:C_0402_1005Metric | C23, C24, C25, C26, C28, C30, C31, C32, C34, C35, C36, C37, C38, C39, C40, C41 +5 |
| 9 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9 |
| 7 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R0, R1, R10, R11, R12, R13, R14 |
| 7 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C6, C9, C12, C15, C18, C19 |
| 6 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R6, R7, R8, R9 |
| 6 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4, C7, C10, C13, C16 |
| 6 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C5, C8, C11, C14, C17 |
| 6 | 47k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15, R16, R17, R18, R19, R20 |
| 2 | 12pF | Capacitor_SMD:C_0402_1005Metric | C20, C21 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R21 |
| 1 | 24 MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C22 |
| 1 | AZ1117-1.8 | Kicad:SOT-223-3_TabPin2 | U2 |
| 1 | AZ1117-3.3 | Kicad:SOT-223-3_TabPin2 | U1 |
| 1 | DC_IN | Connector_BarrelJack:BarrelJack_Wuerth_6941xx301002 | J8 |
| 1 | D_TVS_Dual_AAC | Package_TO_SOT_SMD:SOT-323_SC-70 | D1 |
| 1 | EXP0 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J4 |
| 1 | EXP1 | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J7 |
| 1 | EXP2 | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J6 |
| 1 | LOGO | LOGO | G*** |
| 1 | MCP1826S | Kicad:SOT-223-3_TabPin2 | U3 |
| 1 | SD_Card | Connector_Card:SD_Hirose_DM1AA_SF_PEJ82 | J2 |
| 1 | SFW15R-2STE1LF | Footprints:SFW15R2STE1LF | J3 |
| 1 | T31ZX | Footprints:QFN35P900X900X90-89N-D | IC1 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | USB Type-C | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | W25Q32JVSS | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U5 |
| 1 | W25Q32JVSS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U4 |
The 91 most common of 95 parts.
Questions
How big is the Teacup PCB?
It measures 86.2 × 56.2 mm and has 4 copper layers, 1.58 mm thick.
What parts does the Teacup use?
95 parts, built around the T31ZX, W25Q32JVSSIQ, AZ1117IH-3.3TRG1 and NX2016SA-24MHZ-EXS00A-CS07553. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Teacup KiCad files?
From the HackerComputerCompany/teacup repository on GitHub, at the commit this page was made from: the board is PCB/Teacup/Teacup.kicad_pcb and its schematic PCB/Teacup/Teacup.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Teacup design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers86.2 × 56.2 mm
Teacup t41
thingino/teacup-neo
Universal Ingenic SoC development platform: one carrier + per-SoC interposer modules (T10 through A1, any package) on a DDR4 card edge, with an ESP32-S3 BMC for autonomous LLM-driven development.
123 parts1GPL-3.0 - 2 layers93.6 × 87.6 mm
PanaHacks
TMaxElectronics/PanaHacks_PCB
A PCB for communication with Panasonic PACi air conditioners
126 parts - 4 layers39 × 54 mm
Caravel mvp
TinyTapeout/caravel-mvp-pcb
the minimum necessary to use a Caravel chip (Google MPW or chipIgnite)
58 parts8Apache-2.0 - 4 layers66.5 × 45.7 mm
Tip top
psychogenic/asic-necklace-pcbs
Schems and PCBs for Matt's awesome ASIC necklace, in collaboration with Adam Zeloof
93 parts2 - 2 layers78 × 37.5 mm
- 4 layers71.8 × 66 mm
Minimal carrier board for CM4 rev E
RobertLukan/rpi-cm4-custom-board
Based on my previous projects I needed a customized RPI4 carrier board with 2 cameras input. The initial idea was taken from this project…
45 parts8 - 8 layers100 × 102 mm
