2 layers136.9 × 148.5 mm
Pixel Dust
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
404 parts7
2 layers54.7 × 66 mm
PixeldustPCB
hackclub/pixeldust7Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
- Size
- 54.7 × 66 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 51
- Pads
- 176
- Tracks, vias
- 580, 70
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 Mar 2025
- Updated
- 6 May 2025
Overview
PixeldustPCB is an open-source printed circuit board by hackclub, from the hackclub/pixeldust repository on GitHub. It is a 2-layer board of 54.7 × 66 mm with 38 parts on 51 nets, routed with 580 tracks and 70 vias.
It is built around the DHT11 and SK6812MINI-E. Its parts include 36 diodes and 2 ICs. It belongs with the RP2040 boards of this library.
Main components
2
DHT11
SIP-4-20℃~+60℃ 1mA 3.3V~5.5V 5%RH~95%RH ±2℃ ±5%RH SIP-4 Temperature and Humidity Sensor ROHSAosong ElecTemperature And Humidity Sensor
SK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
README
README.mdPixeldust 🌟
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
The website is still under development (guides etc. have been created yet) But the home page of the site has been created
What is Pixeldust?
This is a brand new (in development) YSWS where you design your own neopixel-based PCB trinket, and we'll ship it to you for free! Make sure to join #pixeldust in the slack so you dont miss out!!
You ship...
- A PCB design for the board
- Working firmware to control the neopixels
We ship...
-
1 fully assembled PCB
- This will include your XIAO RP2040 as well as the neopixels
-
2 unassembled PCBs
Requirements
- Your firmware must be working!!! We won't approve any without.
- It must be more complex than just a simple blinking LED
- Your PCB cannot exceed 100cm^2
- Your PCB must only use 2 layers
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | SK6812MINI | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +20 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | XIAO-RP2040-DIP | Seeed Studio XIAO Series Library:XIAO-RP2040-DIP | U1 |
More from hackclub/pixeldust
12- 2 layers114.3 × 40.3 mm
Pixeldustactual
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
268 parts7 - 2 layers100 × 100 mm
Ledboard
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
239 parts7 - 2 layers84.3 × 97.1 mm
Pixle LED
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
146 parts7 - 2 layers100 × 100 mm
WeatherRing
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
146 parts7 - 2 layers100 × 100 mm
Pixeldust
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
122 parts7 - 2 layers58.4 × 25 mm
Pixeldust
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
116 parts7 - 2 layers103.5 × 75.8 mm
Pixel
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
108 parts7 - 2 layers100 × 100 mm
PixelDust
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
107 parts7 - 2 layers81.5 × 85 mm
Pixeldust
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
92 parts7 - 2 layers60 × 28 mm
Pixeldust
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
86 parts7 - 2 layers95 × 85.8 mm
Pixel
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
86 parts7
Similar boards
- 2 layers102 × 40 mm
- 2 layers96.6 × 82.8 mm
- 2 layers100 × 50 mm
Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm
- 2 layers
OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm
SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers
Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm
Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0
Questions
How big is the PixeldustPCB PCB?
It measures 54.7 × 66 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PixeldustPCB use?
38 parts, built around the DHT11 and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PixeldustPCB KiCad files?
From the hackclub/pixeldust repository on GitHub, at the commit this page was made from: the board is submissions/pixeldust_submission/src/pixeldustPCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PixeldustPCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask hackclub before reusing the design.