2 layers136.9 × 148.5 mm
Pixel Dust
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
404 parts7
2 layers80.6 × 56.9 mm
Pixeldust tutorial
hackclub/pixeldust7Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
- Size
- 80.6 × 56.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 23
- Pads
- 82
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 Mar 2025
- Updated
- 6 May 2025
Overview
Pixeldust tutorial is an open-source printed circuit board by hackclub, from the hackclub/pixeldust repository on GitHub. It is a 2-layer board of 80.6 × 56.9 mm with 16 parts on 23 nets.
It is built around the WS2812B. Its parts include 9 diodes, 4 capacitors, 2 switches and 1 IC. It belongs with the RP2040 boards of this library.
Main components
1README
README.mdPixeldust 🌟
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
The website is still under development (guides etc. have been created yet) But the home page of the site has been created
What is Pixeldust?
This is a brand new (in development) YSWS where you design your own neopixel-based PCB trinket, and we'll ship it to you for free! Make sure to join #pixeldust in the slack so you dont miss out!!
You ship...
- A PCB design for the board
- Working firmware to control the neopixels
We ship...
-
1 fully assembled PCB
- This will include your XIAO RP2040 as well as the neopixels
-
2 unassembled PCBs
Requirements
- Your firmware must be working!!! We won't approve any without.
- It must be more complex than just a simple blinking LED
- Your PCB cannot exceed 100cm^2
- Your PCB must only use 2 layers
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5, D6, D7, D8, D9 |
| 3 | 4.7nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C3, C4 |
| 2 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 100uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | XIAO-RP2040-DIP | XIAO:XIAO-RP2040-DIP | U1 |
Questions
How big is the Pixeldust tutorial PCB?
It measures 80.6 × 56.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pixeldust tutorial use?
16 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pixeldust tutorial KiCad files?
From the hackclub/pixeldust repository on GitHub, at the commit this page was made from: the board is submissions/!Template/src/pixeldust-tutorial.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pixeldust tutorial design in my own project?
Its repository states no licence, so its author keeps all rights: ask hackclub before reusing the design.
More from hackclub/pixeldust
12- 2 layers114.3 × 40.3 mm
Pixeldustactual
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
268 parts7 - 2 layers100 × 100 mm
Ledboard
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
239 parts7 - 2 layers84.3 × 97.1 mm
Pixle LED
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
146 parts7 - 2 layers100 × 100 mm
WeatherRing
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
146 parts7 - 2 layers100 × 100 mm
Pixeldust
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
122 parts7 - 2 layers58.4 × 25 mm
Pixeldust
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
116 parts7 - 2 layers103.5 × 75.8 mm
Pixel
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
108 parts7 - 2 layers100 × 100 mm
PixelDust
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
107 parts7 - 2 layers81.5 × 85 mm
Pixeldust
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
92 parts7 - 2 layers60 × 28 mm
Pixeldust
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
86 parts7 - 2 layers95 × 85.8 mm
Pixel
hackclub/pixeldust
Pixeldust is a new (in development) YSWS @ Hack Club! Create your own PCB design using KiCad, write the firmware for it in Wokwi, then receive your PCBs in the mail!
86 parts7
Similar boards
- 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 2 layers26 × 30 mm
Microcontroller
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
34 parts1.1kCC-BY-4.0 - 4 layers82.6 × 82.5 mm
- 2 layers95.3 × 161.9 mm
- 2 layers42.8 × 28.8 mm
MM Skirt
PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)
11 parts741GPL-3.0 - 2 layers149.6 × 127.1 mm
- 2 layers285.5 × 95 mm
- 2 layers177.7 × 144.5 mm
