2 layers94.5 × 74.4 mm
Ax58100-stm32-ethercat
MetalMusings/MyOwnEtherCATDevice
Documentation accompanying the "Make My Own EtherCAT device" video serie on Youtube.
184 parts93
2 layers33.5 × 23.4 mm
A wearable thing for Hackaday folks.
- Size
- 33.5 × 23.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 39
- Pads
- 138
- Tracks, vias
- 0, 0
- Pours
- 3
- Routed
- Not yet
- KiCad
- KiCad 4
- Created
- 23 Aug 2015
- Updated
- 28 Dec 2015
Overview
Hack is an open-source printed circuit board by Hack-a-Day, from the Hack-a-Day/HaDge_HW repository on GitHub. It is a 2-layer board of 33.5 × 23.4 mm with 33 parts on 39 nets.
It is built around the STF202-22 and BLM18EG221SN1. Its parts include 11 capacitors, 4 resistors, 4 connectors, 3 ICs and 2 inductors. It belongs with the SAM D and SAM boards of this library.
Main components
2README
README.mdHaDge
A wearable thing for Hackaday folks.
We're building a conference badge. No, we're not planning on organizing a Hackaday conference. It's for all the other conferences Hackaday goes to. If you have this badge, you're a member of an elite club, able to socialize in meatspace just as easily as you do on .io.
https://hackaday.io/project/3009-the-hackaday-badge
License
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | hack:C_0603_HandSoldering | C8, C9, C10, C11 |
| 3 | FIDUCIAL | hack:FIDUCIAL | FID1, FID2, FID3 |
| 2 | 10u | hack:c_elec_3x5.3 | C3, C4 |
| 2 | 15p | hack:C_0603_HandSoldering | C6, C7 |
| 2 | 2.2u | hack:C_0603_HandSoldering | C1, C2 |
| 2 | CONN_01X13 | hack:Pin_Header_Straight_1x13 | P2, P3 |
| 1 | 10k | hack:R_0603_HandSoldering | R3 |
| 1 | 10u | hack:ELLVFG | L2 |
| 1 | 1M | hack:R_0603_HandSoldering | R1 |
| 1 | 330 | hack:R_0603_HandSoldering | R4 |
| 1 | 4.5n | hack:C_0603_HandSoldering | C5 |
| 1 | 68 | hack:R_0603_HandSoldering | R2 |
| 1 | ATSAMD21E | hack:QFN-32-1EP_5x5mm_Pitch0.5mm | U3 |
| 1 | BLM18EG221 | hack:L_0603_HandSoldering | L1 |
| 1 | BLUE | hack:LED_0603_HandSoldering | D1 |
| 1 | CONN_01X01 | hack:Pin_Header_Straight_1x01 | P4 |
| 1 | HACKADAY | hack-footprints:HACKADAY-LOGO | G2 |
| 1 | Jumper_NO_Small | hack:SMD_Jumper | JP1 |
| 1 | MC-306 | hack:MC-306 | X1 |
| 1 | MIC5528 | hack:DFN-6-1EP_1.2x1.2mm_Pitch0.4mm | U1 |
| 1 | OSHW | hack-footprints:OSHW-LOGO | G1 |
| 1 | RST | hack:SPST | S1 |
| 1 | STF202 | hack:TSOP-6 | U2 |
| 1 | USB_micro | hack:47346-0001 | P1 |
Questions
How big is the Hack PCB?
It measures 33.5 × 23.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hack use?
33 parts, built around the STF202-22 and BLM18EG221SN1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hack KiCad files?
From the Hack-a-Day/HaDge_HW repository on GitHub, at the commit this page was made from: the board is anool/hack.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hack design in my own project?
Its repository states no licence, so its author keeps all rights: ask Hack-a-Day before reusing the design.
Similar boards
- 4 layers220 × 100 mm
- 2 layers101.6 × 50.8 mm
- 4 layers45 × 27 mm
- 2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
33 parts1kGPL-3.0 - 2 layers127 × 96 mm
Amiga gfxcard
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
33 parts1k - 2 layers92.7 × 58.4 mm
Hacky holidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
33 parts915 - 2 layers240 × 120 mm
Quiver PDB 01
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
33 parts617CERN-OHL-S-2.0