gzeronet/tp601custom PCB for gh60-like keyboard with trackpoint
Tp60 is an open-source printed circuit board by gzeronet, from the gzeronet/tp60 repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 285.3 × 94.9 mm with 128 parts on 98 nets, routed with 489 tracks and 0 vias.
It is built around the IN4148W. Its parts include 60 switches, 59 diodes and 8 connectors. It belongs with the keyboards and input boards of this library.
Custom PCB for gh60-like keyboard with trackpoint. Teensy 2.0 as main Controller.
Also see:
https://github.com/gzeronet/teensy-trackpoint-tmk-keyboard/
| Qty | Value | Footprint | References |
|---|---|---|---|
| 59 | IN4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +43 |
| 59 | KEYSW | keyswitches:SW_MX_1280 | K1, K2, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23 +43 |
| 2 | CONN_4 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | P2, P4 |
| 1 | CONN_10 | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | P6 |
| 1 | CONN_4 | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | P5 |
| 1 | CONN_5 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | P3 |
| 1 | CONN_6 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | P1 |
| 1 | CONN_8 | Type-C:HRO-TYPE-C-31-M-12-PIN | P7 |
| 1 | Conn_01x10_MountingPin | Connector_FFC-FPC:TE_1-84952-0_1x10-1MP_P1.0mm_Horizontal | J1 |
| 1 | SW_PUSH | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1 |
The 127 most common of 128 parts.
It measures 285.3 × 94.9 mm and has 2 copper layers, 1.6 mm thick.
128 parts, built around the IN4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gzeronet/tp60 repository on GitHub, at the commit this page was made from: the board is tp60.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
TheNoobInventor/pi-pico-drone
A micro drone is made using the Raspberry Pi Pico W. It is fitted with the MPU6050 IMU module and BMP280 barometric sensor. The drone will be controlled using TinyMPC and employ a Micro-ROS client on FreeRTOS.
fablabnk/HagiwoClockMultiDivide
This is an attempt to make a PCB version of Hagiwo's Clock Multi Divide module.
sabiinsearch/IoT
Projects related to Internet of Things (IoT)
AndreHatu/MarioKart
Senior Design Project using ESP32s to remake Mario Kart with RC Cars
boquepasa/Plantilla
Entorno de trabajo para familiarizarse con el uso de git en KiCad
emirhanuluakan/UYDUTEPE
Flight control system that may use in Model Satellites
