
ST1S14PHR 3V3 3A
Kampi/KiCad
My private KiCad repository with symbols, 3D models (most of the models are delivered by the part manufacturer), and footprints for my projects.

App to steer a heated bondhead
Bondheadsteering is an open-source printed circuit board by gxurma, from the gxurma/bondheadsteering repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 75 × 80 mm with 51 parts on 49 nets, routed with 297 tracks and 107 vias.
It is built around the ST1S14PHR and STPS3L60U. Its parts include 18 capacitors, 13 resistors, 6 connectors, 3 diodes and 3 inductors. It belongs with the RP2040 and AVR (ATmega, ATtiny) boards of this library.
App to steer a heated bondhead
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6 |
| 4 | 100n | Capacitor_SMD:C_0603_1608Metric | C7, C9, C12, C14 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R5, R8, R11 |
| 4 | 47u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C10, C15, C17, C18 |
| 4 | MountingHole | MountingHole:MountingHole_3.5mm_Pad | H1, H2, H3, H4 |
| 3 | Conn_01x02_Pin | Connector_JST:JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J1, J5, J6 |
| 3 | STPS3L60U | Diode_SMD:D_SMB_Handsoldering | D2, D3, D4 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R13 |
| 2 | 100R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R10 |
| 2 | 10u | Inductor_SMD:L_Taiyo-Yuden_NR-50xx_HandSoldering | L2, L3 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8, C13 |
| 2 | 150p | Capacitor_SMD:C_0603_1608Metric | C11, C16 |
| 2 | 47k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R7 |
| 2 | ST1S14PHR | Package_SO:TI_SO-PowerPAD-8 | U1, U2 |
| 1 | 1100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 1961R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 1uH | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | 3160 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | AP90N02NF NMOS | Package_SO:ONSemi_SO-8FL_488AA | Q1 |
| 1 | Arduino_Nano_RP2040_Connect | Module:Arduino_Nano_WithMountingHoles | A1 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J4 |
| 1 | Conn_01x04_Socket | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x06_Socket | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |

Kampi/KiCad
My private KiCad repository with symbols, 3D models (most of the models are delivered by the part manufacturer), and footprints for my projects.




nikolajevs/ai
Открыть PCBV1.kicadpro в KiCad 10. После обновления репозитория перечитать открытый проект с диска перед сохранением.


davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.

It measures 75 × 80 mm and has 2 copper layers, 1.6 mm thick.
51 parts, built around the ST1S14PHR and STPS3L60U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gxurma/bondheadsteering repository on GitHub, at the commit this page was made from: the board is CAD/BondheadSteering/BondheadSteering.kicad_pcb and its schematic CAD/BondheadSteering/BondheadSteering.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).