2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0
2 layers65 × 56.5 mm
1wire raspi
guycorbaz/1wire_raspi_pcb1A KiCad project for a simple interface board connecting 1-Wire sensors to a Raspberry Pi.
- Size
- 65 × 56.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 33
- Pads
- 64
- Tracks, vias
- 67, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 22 Dec 2025
- Updated
- 9 Jan 2026
Overview
1wire raspi is an open-source printed circuit board by guycorbaz, from the guycorbaz/1wire_raspi_pcb repository on GitHub. It is a 2-layer board of 65 × 56.5 mm with 10 parts on 33 nets, routed with 67 tracks and 0 vias.
Its parts include 4 connectors, 1 capacitor and 1 resistor. It belongs with the sensors and measurement and interfaces and adapters boards of this library.
README
README.md1-Wire Raspberry Pi Adapter
A KiCad project for a simple interface board connecting 1-Wire sensors to a Raspberry Pi.
This hardware is part of the boilert project, which monitors boiler temperatures using a Raspberry Pi.
Features
- Raspberry Pi Integration: Designed for the standard 40-pin Raspberry Pi GPIO header.
- 1-Wire Connectivity: Includes Molex Micro-Fit 3.0 connectors for 1-Wire sensors and external power.
- Integrated Bus Support: Schematic includes the necessary pull-up resistor and power filtering.
Project Information
- Title: 1-Wire Raspi
- Creator: Guy Corbaz
- Revision: 1
- Date: 15 Nov 2012 (Legacy) / Updated 2025
Created using KiCad 9.0
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_2.7mm_M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | MH1, MH2, MH3, MH4 |
| 2 | 1Wire | Connector_Molex:Molex_Micro-Fit_3.0_43045-0412_2x02_P3.00mm_Vertical | J3, J4 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 4.7k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | GPIO | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | Power | Connector_Molex:Molex_Micro-Fit_3.0_43045-0212_2x01_P3.00mm_Vertical | J2 |
Similar boards
- 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0
Questions
How big is the 1wire raspi PCB?
It measures 65 × 56.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 1wire raspi use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 1wire raspi KiCad files?
From the guycorbaz/1wire_raspi_pcb repository on GitHub, at the commit this page was made from: the board is 1wire_raspi.kicad_pcb and its schematic 1wire_raspi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 1wire raspi design in my own project?
Its repository states no licence, so its author keeps all rights: ask guycorbaz before reusing the design.