
SegmentCounter
martinbros/Quantifying-the-Current
Art piece demonstrating the power grid

This project implements a PCB-based digital stopwatch using a crystal oscillator for accurate timing. Counters and shift registers process clock pulses, while 7-segment decoder ICs drive a two-digit display. The system includes start, stop, pause, and reset controls for user-friendly operation.
Counter is an open-source printed circuit board by Gurusiddharth5254, from the Gurusiddharth5254/digital-_stopwatch-_shiftregister repository on GitHub. It is a 2-layer board with 17 parts on 45 nets, routed with 172 tracks and 7 vias.
It is built around the CD4026BE. Its parts include 5 ICs, 4 resistors, 1 connector and 1 crystal. It belongs with the lEDs and displays boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R4, R5, R6, R7 |
| 2 | 100k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | pulldownrst1, pulldownstop1 |
| 2 | CD4026BE | Package_DIP:DIP-16_W7.62mm | U2, U3 |
| 2 | D168K | Display_7Segment:7SegmentLED_LTS6760_LTS6780 | U5, U6 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | rst1, stop1 |
| 1 | 1mega | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | signal1 |
| 1 | 22nf | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | 22nf1 |
| 1 | 4060 | Package_DIP:DIP-16_W7.62mm | U1 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 1 | Crystal | Crystal:Crystal_AT310_D3.0mm_L10.0mm_Vertical | Y1 |

martinbros/Quantifying-the-Current
Art piece demonstrating the power grid


aditya02095/PCB-Design
Here are the gerber files for the digital frequency meter created using KiCAD

guptapurnima/Digital-Electronics-Design-Digital-Frequency-Meter-
Designed Schmitt Trigger and CMOS logic circuits using CD4007 and CD4026 ICs. Created complete schematics, PCB footprints, and 3D models in KiCAD. Validated signal integrity across the designed circuits.

maheen-ahmed1/OptoTACH
Precision non-contact optical tachometer (0–9999 RPM/RPS) built entirely with discrete CMOS logic & 555 timers; no microcontroller, no firmware. Includes KiCad EDA, 3D model, Python simulation, and bench validation.

mariam-essam2/Timer-555-PCB-project
A hardware-based 60-minute Pomodoro timer with dual 7-segment displays, manual/auto-reset, and buzzer alert. Fully simulated, tested, and ready for PCB fabrication with complete schematics, footprints, and Gerber files

SarvaarthN/12-Hr-Clock
This project is a Digital Logic Design (Sem 3) course project at VJTI, focused on the design and implementation of a non-microcontroller-based digital clock using fundamental digital electronics components.

akbar-q/Circuits-PCB-HardwareDesign
The High Voltage Arc Detector is a non-contact RF-based sensing system that detects high-voltage electrical arcs.
17 parts, built around the CD4026BE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Gurusiddharth5254/digital-_stopwatch-_shiftregister repository on GitHub, at the commit this page was made from: the board is counter.kicad_pcb and its schematic counter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Gurusiddharth5254 before reusing the design.