
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

Push Button LED PCB Design using KiCad | Designed a push-button-controlled LED circuit with schematic capture, PCB layout, and Gerber files for manufacturing. A beginner-friendly electronics project focused on PCB design and hardware development.
PushButtonLed is an open-source printed circuit board by gurusaeth12, from the gurusaeth12/push-button-led-kicad repository on GitHub, published under the MIT licence. It is a 2-layer board of 19.5 × 19 mm with 7 parts on 5 nets, routed with 30 tracks and 0 vias.
It is built around the LTL-307EE-012. Its parts include 3 resistors, 1 capacitor, 1 diode, 1 connector and 1 switch.
A beginner electronics project designed in KiCad: a push-button LED circuit with a 5 V supply input. This repository contains the editable schematic, PCB layout, project settings, a component list, and Gerber manufacturing outputs.
Project status: PCB design files and Gerber outputs are included. Physical fabrication and hardware testing are not claimed here; update this section after you test the board.
The circuit is built around a push button and an LED. The schematic also includes resistors and a polarized capacitor. Use the schematic as the source of truth for exact connectivity and component placement.
| Path | Description |
|---|---|
PushButtonLed.kicad_sch | Editable circuit schematic |
PushButtonLed.kicad_pcb | Editable PCB layout |
PushButtonLed.kicad_pro | KiCad project settings |
BOM.csv | Component list / bill of materials |
manufacturing/gerber/ | Gerber copper, mask, silkscreen, board outline, drill, and job files |
images/ | Schematic, PCB layout, and 3D-view screenshots displayed below |
See BOM.csv. Values and part names are copied from the supplied KiCad schematic. Confirm footprints, connector pitch, component polarity, and actual part availability before ordering or assembling.
PushButtonLed.kicad_pro in KiCad.The manufacturing/gerber/ folder contains exported manufacturing files. Before sending them to a PCB manufacturer, verify the board outline, copper layers, drill file, dimensions, clearances, and manufacturing requirements. Upload only the files requested by your manufacturer.



Gurusaeth — Electronics and Communication Engineering student.
If you use or adapt this project, please check the circuit and safety of your own build before applying power.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R1, R2 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3 |
| 1 | 10uf | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C1 |
| 1 | Battery | TestPoint:TestPoint_2Pads_Pitch5.08mm_Drill1.3mm | J1 |
| 1 | Button | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | LTL-307EE | LED_THT:LED_D3.0mm_FlatTop | D1 |

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 19.5 × 19 mm and has 2 copper layers, 1.6 mm thick.
7 parts, built around the LTL-307EE-012. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gurusaeth12/push-button-led-kicad repository on GitHub, at the commit this page was made from: the board is PushButtonLed.kicad_pcb and its schematic PushButtonLed.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).