2 layers209.6 × 115.3 mm
2 layers246.5 × 111 mm
Split Keyboard HackClub
gtmsprs/SplitKey_Board---TypefaceKeyboard based on the designs by @koeg - https://stasis.hackclub.com/starter-projects/split-keyboard
- Size
- 246.5 × 111 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 119
- Nets
- 75
- Pads
- 526
- Tracks, vias
- 695, 158
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 25 Apr 2026
- Updated
- 1 Jul 2026
Overview
Split Keyboard HackClub is an open-source printed circuit board by gtmsprs, from the gtmsprs/SplitKey_Board---Typeface repository on GitHub, published under the MIT licence. It is a 2-layer board of 246.5 × 111 mm with 119 parts on 75 nets, routed with 695 tracks and 158 vias.
Its parts include 48 diodes, 48 switches, 4 resistors and 2 ICs. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.
README
README.mdPROJECT_TYPEFACE
Keyboard based on the designs by @koeg - https://stasis.hackclub.com/starter-projects/split-keyboard
Parts
119| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | D | Diode_SMD:D_SMA | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +32 |
| 48 | SW_Push | marbastlib-xp-gateron_lp:SW_KS33_HS_KS-2P02B01-02_HS_1u | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +32 |
| 2 | 2M | OSHW_Bottom_SS:R_0805_2012Metric | R2, R4 |
| 2 | 806k | OSHW_Bottom_SS:R_0805_2012Metric | R1, R3 |
| 2 | BAT | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP3 |
| 2 | GND | TestPoint:TestPoint_Pad_D2.0mm | TP2, TP4 |
| 2 | XIAO-nRF52840-SMD | RF_Module:MCU_Seeed_ESP32C3 | U1, U2 |
The 106 most common of 119 parts.
Questions
How big is the Split Keyboard HackClub PCB?
It measures 246.5 × 111 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Split Keyboard HackClub use?
119 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Split Keyboard HackClub KiCad files?
From the gtmsprs/SplitKey_Board---Typeface repository on GitHub, at the commit this page was made from: the board is KiCAD Schematics/Split Keyboard_HackClub.kicad_pcb and its schematic KiCAD Schematics/Split Keyboard_HackClub - L.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Split Keyboard HackClub design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers285.5 × 95 mm
- 2 layers139.1 × 107.7 mm
Lotus58 Glow 127
TweetyDaBird/Lotus-58-Classic
A split ergo linear keyboard derived from the Lily58 family
119 parts390 - 2 layers160 × 100 mm
Sender v3.0 geoeffnet
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
119 parts282 - 2 layers202.1 × 133.6 mm
Crosses matrix-4x6
Good-Great-Grand-Wonderful/crosses
A modular ergonomic columar staggered keyboard
119 parts167MIT - 2 layers226 × 74.4 mm
SevenSegment
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.
119 parts94BSD-3-Clause - 2 layers73 × 94 mm
Sportiduino base
sportiduino/sportiduino
Electronic timing system for orienteering and similar outdoor sports events on Arduino
119 parts78GPL-3.0 - 2 layers79 × 85 mm
