
Type f
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Rpi shutdown pcb is an open-source printed circuit board by gtetil, from the gtetil/rpi-shutdown-pcb repository on GitHub. It is a 2-layer board of 63.7 × 30 mm with 25 parts on 35 nets, routed with 93 tracks and 4 vias.
Its parts include 8 resistors, 7 capacitors, 3 ICs, 2 connectors and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100k | rpi-shutdown-pcb:R_1206_HandSoldering_(narrow) | R1, R3, R4, R6 |
| 2 | 0.1uF | rpi-shutdown-pcb:R_1206_HandSoldering_(narrow) | C1, C2 |
| 2 | 10uF | rpi-shutdown-pcb:R_1206_HandSoldering_(narrow) | C3, C4 |
| 1 | 10k | rpi-shutdown-pcb:R_1206_HandSoldering_(narrow) | R8 |
| 1 | 10nF | rpi-shutdown-pcb:C_0805_HandSoldering_(narrow) | C6 |
| 1 | 10uH | rpi-shutdown-pcb:INDUCTOR_10uH_(ASPI-0630LR) | L1 |
| 1 | 150 | rpi-shutdown-pcb:R_1206_HandSoldering_(narrow) | R2 |
| 1 | 2.2K | rpi-shutdown-pcb:R_1206_HandSoldering_(narrow) | R7 |
| 1 | 3.9nF | rpi-shutdown-pcb:C_0805_HandSoldering_(narrow) | C5 |
| 1 | 33uF | rpi-shutdown-pcb:R_1206_HandSoldering_(narrow) | C7 |
| 1 | 6.8K | rpi-shutdown-pcb:R_1206_HandSoldering_(narrow) | R5 |
| 1 | ATTINY85-P | Housings_DIP:DIP-8_W7.62mm | IC1 |
| 1 | CONN_01X02 | rpi-shutdown-pcb:2_PADS_FOR_18_AWG_WIRE | P2 |
| 1 | CONN_01X03 | rpi-shutdown-pcb:3_PADS_FOR_18_AWG_WIRE | P1 |
| 1 | CONN_02X10 | rpi-shutdown-pcb:HEADER_20_PIN_FEMALE_(PPTC102LFBN-RC) | CONN_1 |
| 1 | D_Schottky | rpi-shutdown-pcb:DO-214AB | D1 |
| 1 | LM3480-3.3 | TO_SOT_Packages_SMD:SOT-23_Handsoldering | U1 |
| 1 | MOSFET_N_(2N7002P,215) | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q1 |
| 1 | Polyfuse | rpi-shutdown-pcb:R_1812_HandSoldering | F1 |
| 1 | STEP_DOWN_CONVERTER_(MP2307) | rpi-shutdown-pcb:SOIC8N_(EXPOSED_PAD) | IC2 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

xyphro/UsbGpib
Versatile, cheap and portable USB to GPIB converter (USBTMC class based)


jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

It measures 63.7 × 30 mm and has 2 copper layers, 1.6 mm thick.
25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gtetil/rpi-shutdown-pcb repository on GitHub, at the commit this page was made from: the board is rpi-shutdown-pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask gtetil before reusing the design.