2 layers100 × 70 mm
Wired console k9ay
ra0sms/universal_control_console
Control console for any types of antenna's switches
115 partsMIT
2 layers60.5 × 26.6 mm
AngelCarol
grzesl/AngelCarolAngelCarol is project that contains necessary information to build Angel statue that sings carols.
- Size
- 60.5 × 26.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 44
- Pads
- 112
- Tracks, vias
- 300, 92
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 5 Nov 2024
- Updated
- 7 Dec 2024
Overview
AngelCarol is an open-source printed circuit board by grzesl, from the grzesl/AngelCarol repository on GitHub, published under the MIT licence. It is a 2-layer board of 60.5 × 26.6 mm with 32 parts on 44 nets, routed with 300 tracks and 92 vias.
It is built around the BC817, LL4148 and IRLML5203. Its parts include 9 resistors, 5 connectors, 4 capacitors, 3 ICs and 3 diodes. It belongs with the STM32 boards of this library.
Main components
3
BC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
LL4148
LL-341 Independent 1V@10mA 200mA 4A 4ns 500mW 5uA@75V 75V LL-34 Switching Diodes ROHSMDDSwitching DiodesIRLML5203
SOT-231 P-Channel 1.25W 165mΩ@4.5V 2.5V 30V 3A 43pF 510pF 71pF 9.5nC@0V P-Channel ±20V SOT-23 MOSFETs ROHSKUUMOSFETs
README
README.mdAngelCarol
AngelCarol is project that contains necessary information to build Angel statue that sings carols.
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R4, R5, R6, R7, R8, R9 |
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4 |
| 2 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | LL4148 | Diode_SMD:D_MiniMELF | D1, D2 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 4k7 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | 5V1 | Diode_THT:D_T-1_P5.08mm_Horizontal | DZ1 |
| 1 | COIN_DET | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | IRLML5203 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | LED | LED_THT:LED_D3.0mm | D3 |
| 1 | OUT | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | PC817 | Package_DIP:DIP-4_W7.62mm | OC1 |
| 1 | POWER | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | SPEAKER | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | STM32C011F6Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | TIME | MDLib:POT_BLUE | RV2 |
| 1 | VOLUME | MDLib:POT_BLUE | RV1 |
| 1 | ~ | MDLib:DCDC_PRESET | U3 |
| 1 | ~ | MDLib:DFPlayerMini | U2 |
Similar boards
- 2 layers144.1 × 108.1 mm
- 2 layers92.5 × 61.2 mm
- 2 layers149.9 × 55.9 mm
- 6 layers100 × 50 mm
Archive
sikaxn/FRC-Custom-CAN-Sensor
If you are looking for IronMaple ESP32‐FRC‐devkit resources, please switch branch to dev-board.
92 parts12GPL-3.0 - 4 layers80 × 80 mm
- 2 layers85 × 40 mm
- 2 layers100 × 100 mm
Questions
How big is the AngelCarol PCB?
It measures 60.5 × 26.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AngelCarol use?
32 parts, built around the BC817, LL4148 and IRLML5203. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AngelCarol KiCad files?
From the grzesl/AngelCarol repository on GitHub, at the commit this page was made from: the board is Hardware/AngelCarol.kicad_pcb and its schematic Hardware/AngelCarol.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AngelCarol design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).