2 layers40 × 20 mm
2 layers50.6 × 21.1 mm
Head interface
gruvin/Voron-HeadPCB1Old school wiring harness adapter for Voron 0.2
- Size
- 50.6 × 21.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 13
- Pads
- 30
- Tracks, vias
- 37, 22
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 17 May 2023
- Updated
- 22 May 2023
Overview
Head interface is an open-source printed circuit board by gruvin, from the gruvin/Voron-HeadPCB repository on GitHub. It is a 2-layer board of 50.6 × 21.1 mm with 13 parts on 13 nets, routed with 37 tracks and 22 vias.
It belongs with the interfaces and adapters boards of this library.
README
README.mdVoron-HeadPCB
Oldschool wiring harness strapped to the back of the stepper where a CANN bus board might otherwise be.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | , | ||
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2 |
| 1 | FAN | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J7 |
| 1 | FANS | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | HEATER | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J5 |
| 1 | MOTOR | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J8 |
| 1 | MOTOR_IN | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J3 |
| 1 | NOZ | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | PART FANS | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J6 |
| 1 | PFAN | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J9 |
| 1 | THERM | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J4 |
Similar boards
- 2 layers74.9 × 49.5 mm
- 2 layers35 × 29 mm
MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm
AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm
- 2 layers95 × 95 mm
Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm
Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0
Questions
How big is the Head interface PCB?
It measures 50.6 × 21.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Head interface use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Head interface KiCad files?
From the gruvin/Voron-HeadPCB repository on GitHub, at the commit this page was made from: the board is head-interface.kicad_pcb and its schematic head-interface.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Head interface design in my own project?
Its repository states no licence, so its author keeps all rights: ask gruvin before reusing the design.