
ZArduino
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

Initial version of the 328p based AD9850 function generator
DS9850 Function Generator is an open-source printed circuit board by grtyvr, from the grtyvr/AD9850_v0.1 repository on GitHub. It is a 2-layer board of 82.6 × 69.9 mm with 22 parts on 44 nets, routed with 175 tracks and 0 vias.
It is built around the ATMEGA328P-PU. Its parts include 7 capacitors, 7 connectors, 3 ICs, 2 resistors and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Initial version of the 328p based AD9850 function generator.
It is based on the project:
http://www.vwlowen.co.uk/arduino/AD9850-waveform-generator/AD9850-waveform-generator.htm
Which in turn is based on AD9851 code from Andrew Smallbone - modified for AD9850 http://www.rocketnumbernine.com/2011/10/25/programming-the-ad9851-dds-synthesizer
I have created the KiCad files for a board for this project.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.1uF | Capacitors_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C5, C6 |
| 2 | 220uF | Capacitors_THT:CP_Radial_D8.0mm_P3.50mm | C2, C7 |
| 2 | 22pF | Capacitors_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C3, C4 |
| 1 | 100 | Discret:R3 | R1 |
| 1 | 10k | Discret:R3 | R2 |
| 1 | 16MHz | Crystals:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 1N4001 | Diodes_THT:D_T-1_P5.08mm_Horizontal | D1 |
| 1 | 7805 | myfootprint:TO-220 | U3 |
| 1 | AD9850_Module | myfootprint:DS9850_Module | U2 |
| 1 | ATMEGA328P-PU | Housings_DIP:DIP-28_W7.62mm | U1 |
| 1 | BARREL_JACK | Connectors:BARREL_JACK | J3 |
| 1 | CONN_01X08 | Connectors_JST:JST_EH_B08B-EH-A_08x2.50mm_Straight | J4 |
| 1 | Freq Encoder | Connectors_JST:JST_EH_B05B-EH-A_05x2.50mm_Straight | J5 |
| 1 | Programming Header | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | J2 |
| 1 | Reset/Pgm | Buttons_Switches_THT:SW_PUSH_6mm | SW4 |
| 1 | Sine Out | Connectors_TE-Connectivity:BNC_Socket_TYCO-AMP | J7 |
| 1 | Square Out | Connectors_TE-Connectivity:BNC_Socket_TYCO-AMP | J1 |
| 1 | Step Encoder | Connectors_JST:JST_EH_B05B-EH-A_05x2.50mm_Straight | J6 |

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

coseyfannitutti/discipad
17-key numpad assembled with only through hole components, including usb type-c

matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

coseyfannitutti/romeo
Staggered 40% keyboard pcb that can be assembled with only through hole components, including USB Type-C

mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.


leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

It measures 82.6 × 69.9 mm and has 2 copper layers, 1.6 mm thick.
22 parts, built around the ATMEGA328P-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the grtyvr/AD9850_v0.1 repository on GitHub, at the commit this page was made from: the board is DS9850 Function Generator.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask grtyvr before reusing the design.