2 layers22.9 × 20.3 mm
REV0.0.1 RNQMCD GS AHT21
GroundStudio/GroundStudio_AHT21_module
Explore all the GroundStudio products at GroundStudio.ro
21 parts
2 layers25.3 × 17.8 mm
REV1.0.0 JACWFH GS BMP280-module U
GroundStudio/BMP280_moduleExplore all the GroundStudio products at GroundStudio.ro
- Size
- 25.3 × 17.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 60
- Nets
- 12
- Pads
- 69
- Tracks, vias
- 197, 58
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 14 Mar 2024
- Updated
- 15 Mar 2024
Overview
REV1.0.0 JACWFH GS BMP280-module U is an open-source printed circuit board by GroundStudio, from the GroundStudio/BMP280_module repository on GitHub. It is a 2-layer board of 25.3 × 17.8 mm with 60 parts on 12 nets, routed with 197 tracks and 58 vias.
It is built around the BMP280, BSS138 and 0402B104K100CT, with the FS15B105K100PKG, 1.0T-4P卧贴 and 1N4148WS among its other parts. Its parts include 7 resistors, 4 capacitors, 3 connectors, 2 diodes and 2 transistors.
Main components
9
BMP280
LGA-8(2x2.5)-40℃~+85℃ 0.12hpa 1.5pa/K 1.71V~3.6V 1hpa 300nA 30Kpa~1.1bar I2C、SPI Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Standby mode、On-chip temperature output LGA-8(2x2.5) Pressure Sensors ROHSBoschPressure Sensors
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
0402B104K100CT
0402100nF 10V X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSWalsin TechnologyMultilayer Ceramic Capacitors MLCC - SMD/SMTFS15B105K100PKG
040210V 1uF X5R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSPSAMultilayer Ceramic Capacitors MLCC - SMD/SMT
1.0T-4P卧贴
SMD,P=1mm,卧贴-25℃~+85℃ 1 1A 1mm 1x4P 4 4P 50V Beige LCP Phosphor Bronze SH Surface Mount, Right Angle Tin UL94V-0 SMD,P=1mm,卧贴 Wire To Board Connector ROHSBOOMELEWire To Board Connector
1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching Diodes
A2541WV-7P
插件,P=2.54mm-40℃~+105℃ 1 1x7P 2.54mm 2.54mm 250V 3A 3mm 6mm 7P Black Brass Gold Pin Header Through Hole 插件,P=2.54mm Pin Headers ROHSCJTPin Headers
ME6211C33U4AG-N
X2-SON-4-EP(1x1)-40℃~+85℃@(Ta) 1 260mV@(200mA) 3.3V 30uA 500mA 50uVrms 6V 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive X2-SON-4-EP(1x1) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TZ-P2-0402RTIA1-0.45T
0402-40℃~+80℃ 1.8V~2.4V 120° 200mcd 20mA 60mW 620nm~625nm 633nm Discrete Diode Red Water Clear 0402 LED Indication - Discrete ROHSTUOZHANLED Indication - Discrete
README
README.mdGroundStudio BMP280 module
Get it from ardushop.ro
Explore all the GroundStudio products at GroundStudio.ro
Description
The module integrates the BMP280 temperature and atmospheric pressure sensor that uses the I²C and SPI standards for communication so it can be easily used together with most existing development boards.
Contents
- /Hardware -- Schematics, layout.
Versions
(Not all tags shown)
- [REV 1.0.0]
License
This is released under the Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license. You are welcome to use this for commercial purposes.
Please consider contributing back to this project or others to help the open-source hardware community continue to thrive and grow!
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | R_0402_10k | GS_Global6:R_0402_alt | R1, R2, R3, R4, R5, R6, R7 |
| 4 | G*** | kibuzzard-6343FCED | kibuzzard-6343FCED, kibuzzard-6343FCED, kibuzzard-6343FCED, kibuzzard-6343FCED |
| 2 | BSS138 | GS_Global6:SOT-23 | Q1, Q2 |
| 2 | C_0402_100nF_16V | GS_Global6:C_0402_alt | C1, C2 |
| 2 | C_0402_1uF_10V | GS_Global6:C_0402_alt | C3, C4 |
| 2 | G*** | kibuzzard-6343FCC8 | kibuzzard-6343FCC8, kibuzzard-6343FCC8 |
| 2 | G*** | kibuzzard-6343FEE9 | kibuzzard-6343FEE9, kibuzzard-6343FEE9 |
| 2 | G*** | kibuzzard-6343FD19 | kibuzzard-6343FD19, kibuzzard-6343FD19 |
| 2 | G*** | kibuzzard-6343F740 | kibuzzard-6343F740, kibuzzard-6343F740 |
| 2 | G*** | kibuzzard-6343FD42 | kibuzzard-6343FD42, kibuzzard-6343FD42 |
| 2 | G*** | kibuzzard-6343FED9 | kibuzzard-6343FED9, kibuzzard-6343FED9 |
| 2 | G*** | kibuzzard-6343FD2F | kibuzzard-6343FD2F, kibuzzard-6343FD2F |
| 2 | G*** | kibuzzard-6343F74A | kibuzzard-6343F74A, kibuzzard-6343F74A |
| 2 | SH_1x04_P1.0_H | GS_Global6:SH__1x04_P1.00mm_Horizontal | X1, X2 |
| 1 | 1N4148WS | GS_Global6:SOD-323 | D2 |
| 1 | BMP280 | GS_Global6:LGA-8_2x2.5mm_BMP&BME280 | U1 |
| 1 | Conn_01x07 | GS_Global6:PinHeader_1x07_P2.54mm_Vertical_Male | J1 |
| 1 | FBP1-1-4_ME6211C33U4AG-N | GS_Global6:FBP1-1-4 | REG1 |
| 1 | G*** | kibuzzard-6343F6DB | kibuzzard-6343F6DB |
| 1 | G*** | kibuzzard-6343F70F | kibuzzard-6343F70F |
| 1 | G*** | kibuzzard-634406C2 | kibuzzard-634406C2 |
| 1 | G*** | kibuzzard-6343EE4B | kibuzzard-6343EE4B |
| 1 | G*** | kibuzzard-634539C0 | kibuzzard-634539C0 |
| 1 | G*** | kibuzzard-6343FCE2 | kibuzzard-6343FCE2 |
| 1 | G*** | kibuzzard-63440681 | kibuzzard-63440681 |
| 1 | G*** | kibuzzard-634539DF | kibuzzard-634539DF |
| 1 | G*** | kibuzzard-634539A0 | kibuzzard-634539A0 |
| 1 | LED disable | GS_Global6:SolderJumper_NC | J2 |
| 1 | LOGO | GS_Branding:GS_Logo2_3x3 | G*** |
| 1 | LOGO | GS_Branding:by 2.2x2.1 | G*** |
| 1 | LOGO | GS_Branding:GS_.ro_1.2x0.6 | G*** |
| 1 | LOGO | GS_Branding:GS_GroundStudio_14.6x1.8 | G*** |
| 1 | LOGO | GS_Branding:GS_Logo2_5x5 | G*** |
| 1 | ON_LED | GS_Global6:LED_0402_alt | LED1 |
| 1 | SolderJumper_NO | GS_Global6:SolderJumper_NO | J4 |
The 56 most common of 60 parts.
Questions
How big is the REV1.0.0 JACWFH GS BMP280-module U PCB?
It measures 25.3 × 17.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the REV1.0.0 JACWFH GS BMP280-module U use?
60 parts, built around the BMP280, BSS138, 0402B104K100CT and FS15B105K100PKG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the REV1.0.0 JACWFH GS BMP280-module U KiCad files?
From the GroundStudio/BMP280_module repository on GitHub, at the commit this page was made from: the board is Hardware/REV1.0.0 - Kicad7/REV1.0.0 JACWFH_GS BMP280-module_U.kicad_pcb and its schematic Hardware/REV1.0.0 - Kicad7/REV1.0.0 JACWFH_GS BMP280-module_U.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the REV1.0.0 JACWFH GS BMP280-module U design in my own project?
Its repository states no licence, so its author keeps all rights: ask GroundStudio before reusing the design.
Similar boards
- 2 layers43.2 × 17.7 mm
- 4 layers82 × 56 mm
Spe converter
vl9i/spe-converter
Open-Source SPE-to-Ethernet converter board with SFP, RJ45, H-MTD and MATEnet
206 parts - 2 layers16.5 × 40 mm
- 6 layers65 × 85 mm
Trackball
efogtech/endgame-trackball-hardware
Because it's cheaper than 4 layers. Yes, seriously.
260 parts26 - 6 layers16.4 × 25.3 mm
Nrf54l module
efogdev/nrf54l15-module
nRF54L15 module with full IO set and external DC-DC regulator for maximum efficiency
134 parts12 - 2 layers17.8 × 20.6 mm
- 2 layers53.3 × 17.8 mm
REV0.01 SOJOWS GS MAGMA SPLASH
GroundStudio/GroundStudio_Magma_Splash
GroundStudio Magma Splash
54 parts5