
Beertracker HUB PCB
Beertracker HUB is an IoT device that integrates RFID card scanning with registering pitchers in beertracker
- Size
- 74.5 × 46 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 40
- Pads
- 82
- Tracks, vias
- 153, 3
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Nov 2024
- Updated
- 14 Mar 2025
Overview
Beertracker HUB PCB is an open-source printed circuit board by Grittie, from the Grittie/Beertracker-HUB repository on GitHub. It is a 2-layer board of 74.5 × 46 mm with 17 parts on 40 nets, routed with 153 tracks and 3 vias.
Its parts include 3 resistors, 3 diodes, 3 connectors, 2 switches and 1 IC. It belongs with the home automation and IoT boards and the ESP32 boards of this library.
README
README.mdIoT Start Project
This is your IoT Gitlab project. You can use it to store your code and documentation.
Getting Started
This project contains a setup using Docker. This will help you setup all the necessary tools to start developing your IoT project.
Before you run the docker-compose command, make sure you have to make changes to the configuration. You can find these in
the .env file.
Now, to install and start your project; run the following command in the root of your project:
docker-compose up -dIf everything runs correctly, you should be able to visit your website at http://localhost/.
Structure
There is a specific structure that you should follow when developing your project. This will help you to keep your project organized and easy to understand.
Documentation
All the documentation of your project should be placed in the docs/ folder. This will be used for your portfolio-website.
├── docs/Embedded
Everything you need to run your embedded application should be placed in the embedded/ folder. This includes the source code like .ino-files from Arduino.
├── embedded/Web
Everything you need to run your web application should be placed in the web/ folder. This includes the source code like PHP, HTML, CSS, Javascript and images.
├── web/You can visit your website by going to http://localhost/ in your browser. And you can find your IoT dashboard at http://localhost/dashboard.
Database details
The database is a MySQL database using MariaDB. You can connect to it using the following details:
| Parameter | Value |
|---|---|
| Host | mariadb (from PHP) localhost (from your laptop) |
| Port | 3306 |
| Username | root |
| Password | You can find this in your .env-file. |
| Database | You need to create the database yourself. |
Pages
The documentation github page can be found here
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Conn_01x03_Socket - DHT11 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04_Pin - I2C LCD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x08_Pin - RC522 RFID | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | ESP32_NODEMCU | ESP32_NODEMCU:MODULE_ESP32_NODEMCU | U1 |
| 1 | LED - B | LED_THT:LED_D5.0mm | D2 |
| 1 | LED - R | LED_THT:LED_D5.0mm | D1 |
| 1 | LED - Y | LED_THT:LED_D5.0mm | D3 |
| 1 | LOGO | BeertrackerLOGO:BeertrackerLOGO | G*** |
| 1 | SW_Push - Plus | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW2 |
| 1 | SW_Push - minus | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | TestPoint 3v3 | TestPoint:TestPoint_Pad_1.5x1.5mm | TP2 |
| 1 | TestPoint 5V | TestPoint:TestPoint_Pad_1.5x1.5mm | TP3 |
| 1 | TestPoint GND | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1 |
Similar boards
- 2 layers50 × 35 mm

- 2 layers139.7 × 62.2 mm

- 2 layers29.2 × 55.9 mm

Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm

- 2 layers56.3 × 55.7 mm

StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm

SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm

- 2 layers36 × 51 mm

Questions
How big is the Beertracker HUB PCB PCB?
It measures 74.5 × 46 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Beertracker HUB PCB use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Beertracker HUB PCB KiCad files?
From the Grittie/Beertracker-HUB repository on GitHub, at the commit this page was made from: the board is Beertracker HUB PCB/Beertracker HUB PCB.kicad_pcb and its schematic Beertracker HUB PCB/Beertracker HUB PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Beertracker HUB PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask Grittie before reusing the design.