2 layers121.9 × 88.9 mm
2 layers
8x1probe
greyltc/hardwareHardware disign files, for use with the KiCAD EDA
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 72
- Nets
- 128
- Pads
- 256
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 4
- Created
- 20 Oct 2016
- Updated
- 13 Mar 2022
Overview
8x1probe is an open-source printed circuit board by greyltc, from the greyltc/hardware repository on GitHub. It is a 2-layer board with 72 parts on 128 nets.
It belongs with the power boards of this library.
README
README.mdhardware
Hardware disign files, for use with the KiCAD EDA
Parts
72| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | 2x1_pogo_pin | myparts:2x1_pogo_pin | P19, P20, P21, P22, P23, P24, P25, P26, P28, P29, P30, P31, P32, P33, P34, P35 +32 |
| 16 | 2x1_pogo_pin | projectFootprints:2x1_pogo_pin | P1, P2, P3, P4, P5, P6, P7, P8, P10, P11, P12, P13, P14, P15, P16, P17 |
| 8 | CONN_02X08 | Socket_Strips:Socket_Strip_Straight_2x08 | P9, P18, P27, P52, P53, P54, P71, P72 |
More from greyltc/hardware
12- 4 layers130 × 110 mm
- 4 layers350 × 110 mm
- 4 layers30 × 30 mm
- 4 layers273 × 30 mm
- 4 layers40 × 89 mm
- 4 layers45.1 × 110 mm
- 2 layers135 × 110 mm
ALD solenoidDriverCircuit rev0
greyltc/hardware
Hardware disign files, for use with the KiCAD EDA
37 parts - 4 layers40 × 89 mm
- 4 layers431.8 × 25.4 mm
- 2 layers37 × 108.5 mm
- 2 layers28 × 28 mm
Similar boards
- 2 layers50 × 90 mm
Hackholidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
72 parts915 - 2 layers59.9 × 82.5 mm
Centronics 50Pin
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
72 parts459GPL-3.0 - 2 layers45.7 × 168.3 mm
- 2 layers152.4 × 101.6 mm
8088-FE2010A SBC
skiselev/micro_8088
Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset
72 parts412GPL-3.0 - 2 layers80.8 × 50.8 mm
- 2 layers23 × 120 mm
- 2 layers237.5 × 102.9 mm
Serial
jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.
72 parts301Unlicense - 2 layers109.2 × 78.7 mm
Duo Adapter V0.5
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
72 parts282
Questions
What parts does the 8x1probe use?
72 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 8x1probe KiCad files?
From the greyltc/hardware repository on GitHub, at the commit this page was made from: the board is KiCAD/8x1-probe/KiCad/8x1probe.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 8x1probe design in my own project?
Its repository states no licence, so its author keeps all rights: ask greyltc before reusing the design.