Skip to the content
2 layers69 × 36 mmDinky Charge Regulator, the printed circuit board in 3D

Dinky Charge Regulator

Gregification/BeeMS5

Battery Management System

Size
69 × 36 mm
Copper layers
2
Thickness
1.6 mm
Parts
10
Nets
5
Pads
17
Tracks, vias
15, 38
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
11 May 2025
Updated
15 Sep 2026

Overview

Dinky Charge Regulator is an open-source printed circuit board by Gregification, from the Gregification/BeeMS repository on GitHub, published under the MIT licence. It is a 2-layer board of 69 × 36 mm with 10 parts on 5 nets, routed with 15 tracks and 38 vias.

Its parts include 3 diodes, 1 resistor and 1 transistor. It belongs with the power boards of this library.

README

README.md

BeeMS

Battery Management System (BMS)

a work in progress

BMS for University Of Texas At Arlington's FSAE Race team's E27 vehicle.

point of contact for this repo is George Boone

Development

  • Code Composer Studio 12
    • dependency on Driver Lib
    • projects are stand alone, no dependencies on other projects in this repo.
  • Kicad 9
    • common symbol and footprint library shared amongst all Kicad projects. "zzLocal".

goerge (Gorge Albrecht) is not in any way involved or associated with this project. that account was accidentally listed as a contributor because of a typo in the spelling of george (George Boone).

Parts

10
QtyValueFootprintReferences
2MountingHoleMountingHole:MountingHole_3.5mmH101, H102
1+Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalTP101
1-Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalTP103
1120Diode_THT:D_DO-41_SOD81_P12.70mm_HorizontalD101
115Diode_THT:D_DO-41_SOD81_P12.70mm_HorizontalD103
1680kResistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_HorizontalR105
1Q_NMOSPackage_TO_SOT_THT:TO-247-3_Horizontal_TabDownQ101
1regConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalTP102
1~Diode_THT:D_DO-41_SOD81_P12.70mm_HorizontalD102

More from Gregification/BeeMS

12
  • 2 layers319.7 × 58.4 mmMini Orion TEM, the printed circuit board in 3D

    Mini Orion TEM

    Gregification/BeeMS

    Battery Management System

    170 parts5MIT
  • 2 layers60 × 100 mmMasterBoard A, the printed circuit board in 3D

    MasterBoard A

    Gregification/BeeMS

    Battery Management System

    167 parts5MIT
  • 2 layers50 × 110.1 mmVoltageTap Bee, the printed circuit board in 3D

    VoltageTap Bee

    Gregification/BeeMS

    Battery Management System

    156 parts5MIT
  • 2 layers50 × 105 mmVoltageTap A, the printed circuit board in 3D

    VoltageTap A

    Gregification/BeeMS

    Battery Management System

    144 parts5MIT
  • 2 layers60 × 60 mmCANE Junction, the printed circuit board in 3D

    CANE Junction

    Gregification/BeeMS

    Battery Management System

    98 parts5MIT
  • 2 layersLV Sensor, the printed circuit board in 3D

    LV Sensor

    Gregification/BeeMS

    Battery Management System

    68 parts5MIT
  • 2 layers22.6 × 60.7 mmCAN Eth Bridge, the printed circuit board in 3D

    CAN Eth Bridge

    Gregification/BeeMS

    Battery Management System

    59 parts5MIT
  • 2 layers34.4 × 55.3 mmW5500 testing, the printed circuit board in 3D

    W5500 testing

    Gregification/BeeMS

    Battery Management System

    43 parts5MIT
  • 2 layers27.1 × 48.3 mmHC ohm tester, the printed circuit board in 3D

    HC ohm tester

    Gregification/BeeMS

    Battery Management System

    30 parts5MIT

Similar boards

  • 2 layers57 × 55.2 mmLogicAnalyzer, the printed circuit board in 3D

    LogicAnalyzer

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    10 parts5.1kGPL-3.0
  • 2 layers32.2 × 15.4 mmProtector, the printed circuit board in 3D

    Protector

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    10 parts4.3kMIT
  • 2 layers26 × 18 mmConn, the printed circuit board in 3D

    Conn

    yaqwsx/KiKit

    Automation tools for KiCAD

    10 parts2.1kMIT
  • 2 layers44.3 × 30.5 mmLime2-SATA RevA, the printed circuit board in 3D

    Lime2-SATA RevA

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    10 parts1.5k
  • 2 layers17.8 × 43.2 mmNano Adapter, the printed circuit board in 3D

    Nano Adapter

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    10 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    10 parts1kGPL-3.0

Questions

How big is the Dinky Charge Regulator PCB?

It measures 69 × 36 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Dinky Charge Regulator use?

10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Dinky Charge Regulator KiCad files?

From the Gregification/BeeMS repository on GitHub, at the commit this page was made from: the board is hardware/Dinky Charge Regulator/Dinky Charge Regulator.kicad_pcb and its schematic hardware/CAN DC SS switch/CAN DC SS switch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Dinky Charge Regulator design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).