

Golden coupon
These are editable software demonstrations, not manufacturer-approved reference designs.
- Size
- 40 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 3
- Pads
- 10
- Tracks, vias
- 8, 1
- Routed
- Yes
- KiCad
- KiCad 8 (file 20240108)
- Created
- 17 Sep 2026
- Updated
- 19 Sep 2026
Overview
Golden coupon is an open-source printed circuit board by GreenShoeGarage, from the GreenShoeGarage/Copperbench repository on GitHub, published under the MIT licence. It is a 2-layer board of 40 × 30 mm with 9 parts on 3 nets, routed with 8 tracks and 1 via.
README
examples/README.mdExample boards and test files
These are editable software demonstrations, not manufacturer-approved reference designs.
everyday-maker-sampler.json: unconnected layout of 14 representative v1.4 parts. It is a visual/layout demonstration, not a complete circuit.uno-r3-shield-icsp.json: Uno shield interface with six optional main-MCU ICSP contacts appended to the original 32 perimeter contacts. Check the physical host and mating connectors.polarity-and-silkscreen.json: visual software proof of diode/LED/capacitor role labels, both-face text, drawings and filled image geometry. It is not a working circuit.power-ground-planes.json: small software fixture with top +5V and bottom GND pours, a through-hole ground seed and a surface-mount ground attachment through a short trace and via. Imported pours refill automatically. This is a geometry demonstration, not a powered circuit.starter.json: small through-hole learning board with explicit nets to route.little-light-routed.json: that board routed through the actual browser interface during release testing; no blocking geometry findings in that exercised state. Its generic parts still require datasheet verification.smd.json: surface-mount layout exercise.mixed.json: mixed through-hole/SMD and two-face exercise.golden-coupon.json: 40 × 30 mm geometric regression fixture with top, bottom and via-linked nets, through pads, one NPTH round hole, one NPTH slot and text.golden-coupon.kicad_pcbandgolden-fabrication/: generated interchange/manufacturing files for that regression fixture.
The golden coupon's verified part flag identifies controlled software test geometry, not a certification against a particular purchased component. It is labelled as a software fixture in its evidence record. No example has been physically fabricated or submitted to a manufacturer as part of this release.
Regression suites write new fixtures, files and screenshots under ignored tests/output/, not these checked-in examples. IDs in test outputs may change without changing their geometric purpose.
The golden manufacturing files were regenerated with v1.3.1 to remove the old silkscreen clear-frame defect. Re-export any older manufacturing ZIPs; see the correction guide.
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Test point | Copperbench:Test point · 2 mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 1 | 1×2 / 2.54 | Copperbench:Header · 1 × 2 | J1 |
The 7 most common of 9 parts.
Similar boards
- 2 layers103 × 30.5 mm

- 2 layers31.8 × 47.6 mm

- 2 layers24 × 27.3 mm

Expansion Card Retrofit
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
9 parts1.1kCC-BY-4.0 - 2 layers15.6 × 17.3 mm

SKR Mini TFT Thermistor Board
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
9 parts1.1kGPL-3.0 - 2 layers39.1 × 49.5 mm

Learnoliver
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
9 parts915 - 2 layers17.4 × 16.9 mm

- 2 layers9.8 × 108 mm

- 2 layers

Keyboard after
adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
9 parts547GPL-3.0
Questions
How big is the Golden coupon PCB?
It measures 40 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Golden coupon use?
9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Golden coupon KiCad files?
From the GreenShoeGarage/Copperbench repository on GitHub, at the commit this page was made from: the board is examples/golden-coupon.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Golden coupon design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).