2 layers42 × 45 mm
Temp hum monitor
magkopian/esp-arduino-temp-monitor
ESP8266 based temperature and humidity monitor.
14 parts3
2 layers50.9 × 53.2 mm
- Size
- 50.9 × 53.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 25
- Pads
- 80
- Tracks, vias
- 146, 12
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 14 Aug 2023
- Updated
- 14 Aug 2023
Overview
Pgs is an open-source printed circuit board by Greatreyhan, from the Greatreyhan/pcb_pgs_sensor repository on GitHub. It is a 2-layer board of 50.9 × 53.2 mm with 24 parts on 25 nets, routed with 146 tracks and 12 vias.
It is built around the ESP-12E, DHT11 and AMS1117-3.3. Its parts include 7 resistors, 6 capacitors, 4 connectors, 3 ICs and 2 switches. It belongs with the ESP8266 boards of this library.
Main components
3
ESP-12E
SMD,24x16mm-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、SPI、I2C SMD,24x16mm WiFi Modules ROHSAi-ThinkerWiFi Modules
DHT11
SIP-4-20℃~+60℃ 1mA 3.3V~5.5V 5%RH~95%RH ±2℃ ±5%RH SIP-4 Temperature and Humidity Sensor ROHSAosong ElecTemperature And Humidity Sensor
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5, R9 |
| 2 | 10u | Capacitor_SMD:CP_Elec_4x5.3 | C4, C5 |
| 2 | 1u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C3 |
| 2 | Button | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC6xxJ | SW1, SW2 |
| 1 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 100nf | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C6 |
| 1 | 1K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Conn_01x03_Socket | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J5 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U3 |
| 1 | ESP-12E | RF_Module:ESP-12E | U1 |
| 1 | Jack-DC | Connector_BarrelJack:BarrelJack_SwitchcraftConxall_RAPC10U_Horizontal | J4 |
| 1 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | LIGHT_SEN | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | NetTie_2 | NetTie:NetTie-2_THT_Pad0.3mm | NT1 |
| 1 | TO_FTDI | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J1 |
Questions
How big is the Pgs PCB?
It measures 50.9 × 53.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pgs use?
24 parts, built around the ESP-12E, DHT11 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pgs KiCad files?
From the Greatreyhan/pcb_pgs_sensor repository on GitHub, at the commit this page was made from: the board is pgs.kicad_pcb and its schematic pgs.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pgs design in my own project?
Its repository states no licence, so its author keeps all rights: ask Greatreyhan before reusing the design.
Similar boards
- 2 layers65.3 × 39.6 mm
- 2 layers71.1 × 49.9 mm
Placa tesis
FranMald/Proyecto-Final-luminarias
Sistema de luminarias led monitoreadas remotamente
53 parts - 2 layers101.6 × 147.3 mm
Karabas pro revER
andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers
223 parts37MIT - 2 layers68.5 × 53.3 mm
Iot wifi uno hw
iotmakervn/iot-wifi-uno-hw
Open hardware ESP8266 Uno board - Internet Of Things WiFi Uno
56 parts26 - 2 layers26.4 × 17.3 mm
Knock homekit v1
andrewngai/HomekitKnock
This repo is the resources for the project on https://youtu.be/X5OxuFtGn0
12 parts17 - 2 layers
Smol boy V1
BogdanTheGeek/ESP_RC
An Open-Source Transmitter/Receiver for RC Planes, Cars, Boats and more based on ESP-NOW
21 parts16BSD-2-Clause - 2 layers51 × 43 mm
Egg timer
MakersFunDuck/Common-Kitchen-Timer-With-LCD-Replacement-Board
A replacement PCB board for common 4 digit 7 segment LCD kitchen timers.
25 parts13GPL-3.0