

Ts30013-breakout
A breakout board for the TS30013 switching voltage regulator.
- Size
- 46 × 35 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 10
- Pads
- 63
- Tracks, vias
- 45, 16
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 27 Aug 2026
- Updated
- 27 Aug 2026
Overview
Ts30013-breakout is an open-source printed circuit board by GraysonKippes, from the GraysonKippes/ts30013-breakout repository on GitHub, published under the Unlicense licence. It is a 4-layer board of 46 × 35 mm with 15 parts on 10 nets, routed with 45 tracks and 16 vias.
It is built around the PMEG4050EP. Its parts include 5 capacitors, 4 connectors, 2 diodes, 1 resistor and 1 IC. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdTS30013 Breakout Board
This is a breakout board for the TS30013 switching voltage regulator, produced by Semtech Corporation. This board takes in from 4.5VDC to 18VDC input and puts out 3.3VDC; additionally, it can supply up to 3A of current. This board provides several male and female pins, as well as a screw terminal block, through which to access the power output.
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 22μF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C5 |
| 1 | 0.1μF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 100Ω | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 10μF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 2.54mm Female Pin Header | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J3 |
| 1 | 2.54mm Male Pin Header | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J2 |
| 1 | 22nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3 |
| 1 | 4.7μH | Custom_Footprints:L_Wurth_WE_PD_744777004 | L1 |
| 1 | ENABLE | Custom_Connectors:EG1218 | SW1 |
| 1 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | PMEG4050EP | Diode_SMD:D_SOD-123F | D2 |
| 1 | POWER IN | Custom_Connectors:CUI_PJ-202AH | J1 |
| 1 | POWER OUT | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J4 |
| 1 | TS30013 | Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm | U1 |
Similar boards
- 4 layers40 × 47 mm

- 4 layers54 × 100 mm

Oxrs black 004
austinscreations/Oxrs-Black
a custom rack controller that is based of the rack32 but includes some upgrades and major changes
92 parts1GPL-3.0 - 2 layers142 × 23 mm

Massue bento v4
benkuper/BenTo-Legacy
Legacy repository for the former BenTo-Club project
101 parts1GPL-3.0 - 2 layers57.2 × 57.2 mm

- 2 layers125 × 50.8 mm

FAST Controller
carlsuttle/FAST-Avionics-PCBs
KiCad PCB designs for FAST avionics, including the flight controller and GPS/XIAO outboard.
68 parts - 4 layers

Stm32 f7
dr-paradox-design/flightcontroller
A comprehensive STM32F7-based development board designed for IoT applications, featuring multiple sensors, wireless connectivity, and power management capabilities.
103 parts - 4 layers80 × 60 mm

Synchronous Buck Converter
farhad-ekramitalab/LM5141-Synchronous-Buck-Converter
12V to 3.3V 5A synchronous buck converter using TI LM5141-Q1. Complete design flow including LTspice simulation, control-loop design, KiCad schematic, PCB layout, and hardware validation.
44 parts - 2 layers48.5 × 86 mm

Hodor hardware
mcmaier/hodor-hardware
HODOR hardware design files (KiCad 9) — Schiebetuersteuerung
187 parts
Questions
How big is the Ts30013-breakout PCB?
It measures 46 × 35 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Ts30013-breakout use?
15 parts, built around the PMEG4050EP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ts30013-breakout KiCad files?
From the GraysonKippes/ts30013-breakout repository on GitHub, at the commit this page was made from: the board is kicad/ts30013-breakout.kicad_pcb and its schematic kicad/ts30013-breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ts30013-breakout design in my own project?
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).