2 layers36.8 × 17.8 mm
EVSE Car Simulator
gonium/EVSE-Car-Simulator
A simple car simulator PCB for testing EVSE.
10 parts55MIT
2 layers70.1 × 40.9 mm
EVSE Easy Test
gonium/EVSE-Car-Simulator55A simple car simulator PCB for testing EVSE.
- Size
- 70.1 × 40.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 12
- Pads
- 55
- Tracks, vias
- 67, 23
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Sep 2017
- Updated
- 21 Aug 2026
Overview
EVSE Easy Test is an open-source printed circuit board by gonium, from the gonium/EVSE-Car-Simulator repository on GitHub, published under the MIT licence. It is a 2-layer board of 70.1 × 40.9 mm with 17 parts on 12 nets, routed with 67 tracks and 23 vias.
Its parts include 8 resistors, 2 connectors, 2 switches and 1 diode.
README
README.mdEVSE-Car-Simulator
A simple car simulator PCB for testing EVSE, implements DIN EN 61851 and J1772. This repository contains:
- The hardware design files (KICAD)
- The documentation for the car simulator.
Please see https://evsim.gonium.net for more information.
License
This project is (c) 2017 Mathias Dalheimer and available under the MIT license. In short:
Permissions:
- Commercial use ok
- Modification ok
- Distribution ok
- Private use ok
Limitations:
- no liability
- no warranty
Conditions:
- keep license and copyright notice
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100 | local:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | 1N4007 | local:D_DO-41_SOD81_P7.62mm_Horizontal | D1 |
| 1 | 1k2 | local:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R7 |
| 1 | 1k5 | local:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R8 |
| 1 | 220 | local:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4 |
| 1 | 270 | local:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3 |
| 1 | 2k7 | local:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R6 |
| 1 | 3k3 | local:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 680 | local:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5 |
| 1 | CP diag | local:Pin_Header_Straight_1x02_Pitch2.54mm | J2 |
| 1 | CP state | local:LorlinCK-1060 | SW2 |
| 1 | PP current | local:LorlinCK-1060 | SW1 |
| 1 | Type 2 | local:RIACon175_3poles_AKL175-03 | J1 |
The 13 most common of 17 parts.
More from gonium/EVSE-Car-Simulator
1Similar boards
- 2 layers50 × 35 mm
- 2 layers139.7 × 62.2 mm
- 2 layers29.2 × 55.9 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm
- 2 layers56.3 × 55.7 mm
StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm
SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm
- 2 layers36 × 51 mm
Questions
How big is the EVSE Easy Test PCB?
It measures 70.1 × 40.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EVSE Easy Test use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EVSE Easy Test KiCad files?
From the gonium/EVSE-Car-Simulator repository on GitHub, at the commit this page was made from: the board is EVSE-Easy-Test/EVSE-Easy-Test.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the EVSE Easy Test design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).