Skip to the content
2 layers40.6 × 27.9 mmVoltageSensor, the printed circuit board in 3D

VoltageSensor

gongminmin/Railgun9

A simple design of railgun

Size
40.6 × 27.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
19
Pads
58
Tracks, vias
79, 0
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
4 Jun 2021
Updated
28 Jun 2022

Overview

VoltageSensor is an open-source printed circuit board by gongminmin, from the gongminmin/Railgun repository on GitHub, published under the MIT licence. It is a 2-layer board of 40.6 × 27.9 mm with 22 parts on 19 nets, routed with 79 tracks and 0 vias.

It is built around the LM393. Its parts include 11 resistors, 4 diodes, 3 ICs, 2 connectors and 1 capacitor.

Main components

1

README

README.md

Railgun

License

A railgun is a type of mass driver. It contains a pair of rails to accelerate a conductor projectile to a high velocity. This project is a design of a toy level railgun. We'd like to make it easy to implement, so people can build it as a hobby project.

NOTE: Please turn on git LFS when cloning this project.

Design

The principle of our design, and a detailed introduction of subsystems are in Design

Disclaimer

A railgun is operated by LETHALLY high voltage and current. If you don't have enough knowledge and experiences on high voltage electric, please keep extreme cautions on insulation.

Directories

  • Circuit folder is the electric design of the system. The files can be open by KiCad
  • Doc folder contains some documents

License

Railgun is distributed under the terms of MIT License. See LICENSE for details.

Parts

22
QtyValueFootprintReferences
42.2KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR7, R8, R9, R10
44.7KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3, R4, R5, R6
4LEDLED_THT:LED_D3.0mm_FlatTopD1, D2, D3, D4
21KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R11
2LM393Package_DIP:DIP-8_W7.62mmU1, U2
10.1uFCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC1
112V BatteryConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalBT1
120KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
1From Capacitor BankConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1
1PC817Package_DIP:DIP-4_W7.62mmU3
1To ControlConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2

More from gongminmin/Railgun

2
  • 2 layers66 × 73.7 mmZVS, the printed circuit board in 3D

    ZVS

    gongminmin/Railgun

    A simple design of railgun

    18 parts9MIT
  • 2 layers49.5 × 33 mmRail, the printed circuit board in 3D

    Rail

    gongminmin/Railgun

    A simple design of railgun

    10 parts9MIT

Similar boards

  • 2 layers231.1 × 106.7 mmSnark barker, the printed circuit board in 3D

    Snark barker

    schlae/snark-barker

    A 100% compatible replica of the famed SB 1.0 sound card

    199 parts687
  • 2 layers130 × 80 mmSmu main 1, the printed circuit board in 3D

    Smu main 1

    jaromir-sukuba/J-SMU

    DIY source-measure unit

    210 parts244
  • 2 layers100 × 85 mmVNA, the printed circuit board in 3D

    VNA

    profdc9/VNA

    Vector Network Analyzer based on the STM32F103C8T6 bluepill

    178 parts93
  • 4 layers292.1 × 88.3 mmSnark barker mca, the printed circuit board in 3D

    Snark barker mca

    schlae/snark-barker-mca

    A Sound Blaster compatible sound card for Micro Channel bus computers

    177 parts69
  • 2 layers133 × 98 mmPrecharge, the printed circuit board in 3D

    Precharge

    michaelruppe/FSAE

    Projects for Formula SAE Electric Vehicle competition (Australia 2019/2020)

    121 parts59MIT
  • 4 layers285.1 × 48.1 mmAyab esp32, the printed circuit board in 3D

    Ayab esp32

    AllYarnsAreBeautiful/ayab-hardware

    Contains the schematics and layouts for the AYAB Arduino shield

    246 parts50CC-BY-SA-4.0
  • 4 layers72.4 × 44.4 mmBtmdpcb v04 eval, the printed circuit board in 3D

    Btmdpcb v04 eval

    17o2/bluetooth-minidisc

    Adding built-in bluetooth connectivity to a 20-year-old Mindisc player

    115 parts45
  • 2 layers29 × 27 mmUSB C-3-way splitter V5, the printed circuit board in 3D

    USB C-3-way splitter V5

    bluepylons/USB-C-3-way-splitter

    A splitter board (for making a cable splitter) for turning a 5V 3A USB power source to 3 5V 1A USB sources

    39 parts40MIT

Questions

How big is the VoltageSensor PCB?

It measures 40.6 × 27.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the VoltageSensor use?

22 parts, built around the LM393. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the VoltageSensor KiCad files?

From the gongminmin/Railgun repository on GitHub, at the commit this page was made from: the board is Circuit/Sensor/VoltageSensor.kicad_pcb and its schematic Circuit/Power/Power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the VoltageSensor design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).