Skip to the content
2 layers157.5 × 132.1 mmStarter, the printed circuit board in 3D

A preliminary design of a plasma engine for spacecraft propulsion

Size
157.5 × 132.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
11
Pads
36
Tracks, vias
25, 0
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
30 May 2020
Updated
24 Sep 2022

Overview

Starter is an open-source printed circuit board by gongminmin, from the gongminmin/ImpulseDrive repository on GitHub, published under the MIT licence. It is a 2-layer board of 157.5 × 132.1 mm with 13 parts on 11 nets, routed with 25 tracks and 0 vias.

Its parts include 3 resistors, 3 connectors, 2 capacitors and 2 inductors.

README

README.md

Impulse Drive

License

In Star Trek universe, impulse drive is a propulsion system of spacecrafts for interplanetary travel. This project is trying to design a real-world impulse drive. The basic characteristics of this engine are

  • Electric propulsion
  • Large thrust
  • Long specific impulse
  • No or little moving parts
  • Good scalability
  • Low cost

We'd like to make it easy to implement, so people can build it as a hobby project.

NOTE: Please turn on git LFS when cloning this project.

Method

There are many different engine designs for spacecraft propulsion, check wikipedia for a list. The only one design among them that fits these requirements is magnetoplasmadynamic thruster, a.k.a, MPDT or MPD thruster. More details in MPD.

Our design is based on MPDT, with several significant improvements.

Design

The principle of our design, and a detailed introduction of modules are in Design

Disclaimer

MPD thruster is operated by LETHALLY high voltage and current. If you don't have enough knowledge and experiences on high voltage electric, please keep extreme cautions on insulation.

Directories

  • Circuit folder is the electric design of the system. The files can be open by KiCad
  • 3DModel folder is the 3D model design of some components. It's in Blender format.
  • Doc folder contains some documents

License

ImpulseDrive is distributed under the terms of MIT License. See LICENSE for details.

Parts

13
QtyValueFootprintReferences
2100M/5WResistor_THT:R_Axial_Power_L50.0mm_W9.0mm_P55.88mmR1, R2
210nF/8kVPower:C_Axial_L50.0mm_D23.0mm_P55.0mm_HorizontalC1, C2
210uHInductor_THT:L_Toroid_Horizontal_D9.5mm_P15.00mm_Diameter10-5mm_Amidon-T37L1, L2
11Ω/10WResistor_THT:R_Axial_DIN0922_L20.0mm_D9.0mm_P30.48mm_HorizontalR3
120:20Power:Air_Core_Transformer_1P_1ST2
1BSH12-N406L 8:6400Power:Flyback_Transformer_BSH12-N406LT1
1From PowerTerminalBlock:TerminalBlock_bornier-2_P5.08mmJ1
1Output+MountingHole:MountingHole_6.4mm_M6_ISO14580_PadJ2
1Output-MountingHole:MountingHole_6.4mm_M6_ISO14580_PadJ3
1SPARK_GAP 10kVPower:Spark_GapE1

More from gongminmin/ImpulseDrive

7
  • 2 layers116.8 × 61 mmFullCapacitorBankAdapter, the printed circuit board in 3D

    FullCapacitorBankAdapter

    gongminmin/ImpulseDrive

    A preliminary design of a plasma engine for spacecraft propulsion

    45 parts4MIT
  • 2 layers85.1 × 30.5 mmSwitch, the printed circuit board in 3D

    Switch

    gongminmin/ImpulseDrive

    A preliminary design of a plasma engine for spacecraft propulsion

    40 parts4MIT
  • 2 layers43.2 × 41.9 mmControl, the printed circuit board in 3D

    Control

    gongminmin/ImpulseDrive

    A preliminary design of a plasma engine for spacecraft propulsion

    31 parts4MIT
  • 2 layers63.5 × 43.2 mmMiniCapacitorBank, the printed circuit board in 3D

    MiniCapacitorBank

    gongminmin/ImpulseDrive

    A preliminary design of a plasma engine for spacecraft propulsion

    23 parts4MIT
  • 2 layers70 × 84.4 mmNozzle, the printed circuit board in 3D

    Nozzle

    gongminmin/ImpulseDrive

    A preliminary design of a plasma engine for spacecraft propulsion

    20 parts4MIT
  • 2 layers134.6 × 63.5 mmFullCapacitorBank, the printed circuit board in 3D

    FullCapacitorBank

    gongminmin/ImpulseDrive

    A preliminary design of a plasma engine for spacecraft propulsion

    12 parts4MIT
  • 2 layers27.9 × 15.2 mmPropellantInjector, the printed circuit board in 3D

    PropellantInjector

    gongminmin/ImpulseDrive

    A preliminary design of a plasma engine for spacecraft propulsion

    3 parts4MIT

Similar boards

  • 2 layers40 × 20 mmUsb uart, the printed circuit board in 3D

    Usb uart

    earthtojake/text-to-cad

    Design physical products with AI

    13 parts26kMIT
  • 2 layers35 × 29 mmMagSpoofTC, the printed circuit board in 3D

    MagSpoofTC

    samyk/magspoof

    A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

    13 parts4.2k
  • 2 layers20.6 × 23.6 mmAO-03 signal amplifier, the printed circuit board in 3D

    AO-03 signal amplifier

    fossasia/pslab-scripts

    Pocket Science Lab - Scripts for Sensor Experiments

    13 parts1.6kApache-2.0
  • 2 layers47 × 35.6 mmMX7-C-35PL C11, the printed circuit board in 3D

    MX7-C-35PL C11

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    13 parts1.2k
  • 2 layers95 × 95 mmCube batteryboard, the printed circuit board in 3D

    Cube batteryboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    13 parts1.1kGPL-3.0
  • 2 layers15.2 × 20.3 mmPt100stick, the printed circuit board in 3D

    Pt100stick

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    13 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    13 parts1kGPL-3.0

Questions

How big is the Starter PCB?

It measures 157.5 × 132.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Starter use?

13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Starter KiCad files?

From the gongminmin/ImpulseDrive repository on GitHub, at the commit this page was made from: the board is Circuit/Starter/Starter.kicad_pcb and its schematic Circuit/CapacitorBank/CapacitorBank.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Starter design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).