

PCB reflow Plate
- Size
- 100 × 22 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 45
- Pads
- 147
- Tracks, vias
- 336, 195
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 24 Jan 2023
- Updated
- 29 Jan 2023
Overview
PCB reflow Plate is an open-source printed circuit board by gomerthegoose, from the gomerthegoose/PCB-Hotplate repository on GitHub. It is a 2-layer board of 100 × 22 mm with 33 parts on 45 nets, routed with 336 tracks and 195 vias.
It is built around the AP7370-33Y and SI3456DDV. Its parts include 8 resistors, 5 capacitors, 5 ICs, 4 transistors and 4 connectors. It belongs with the STM32 boards of this library.
Main components
2AP7370-33Y
SOT-89-40℃~+125℃@(Tj) 1 1.5uA 18V 3.3V 300mA 500mV@(100mA) Fixed Over Current Protection、Short Circuit Protection、Thermal Shutdown Positive SOT-89 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSI3456DDV
SOT-23-6-55℃~+150℃ 1 N-channel 2.5V 2W 30V 32mΩ@4.5V 32pF 345pF 4.1nC@4.5V 55pF 6A SOT-23-6 MOSFETs ROHSTECH PUBLICMOSFETs
README
README.mdPCB-Hotplate
- pcb based hot plate with swapable heater -
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R9 |
| 3 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8, R10 |
| 3 | Q_NPN_BCE | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q4 |
| 3 | SC39-11YWA | Display_7Segment:7SegmentLED_LTS6760_LTS6780 | U3, U4, U5 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7 |
| 2 | 1K | Resistor_SMD:R_Array_Convex_4x0603 | RN1, RN2 |
| 2 | 2.2uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | 2k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3 |
| 2 | NTC 10k | Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_Vertical | TH1, TH2 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1, SW2 |
| 1 | 100nF *3 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | AP7370 | Package_TO_SOT_SMD:SOT-23 | U1 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Wuerth_6941xx301002 | J4 |
| 1 | Conn_01x02_Female | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J5 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | STM32F030K6Tx | Package_QFP:LQFP-32_7x7mm_P0.8mm | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW3 |
| 1 | Si3456DDV | Package_SO:TSOP-6_1.65x3.05mm_P0.95mm | Q3 |
Similar boards
- 2 layers36.4 × 56.1 mm

- 2 layers83.8 × 61 mm

- 2 layers60 × 50 mm

- 2 layers86.4 × 58.4 mm

- 2 layers48.3 × 43.2 mm

- 2 layers59.2 × 59.2 mm

- 2 layers65 × 30 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
33 parts1kGPL-3.0 - 2 layers127 × 96 mm

Amiga gfxcard
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
33 parts1k
Questions
How big is the PCB reflow Plate PCB?
It measures 100 × 22 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCB reflow Plate use?
33 parts, built around the AP7370-33Y and SI3456DDV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB reflow Plate KiCad files?
From the gomerthegoose/PCB-Hotplate repository on GitHub, at the commit this page was made from: the board is PCB reflow Plate/PCB reflow Plate.kicad_pcb and its schematic PCB reflow Plate/PCB reflow Plate.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB reflow Plate design in my own project?
Its repository states no licence, so its author keeps all rights: ask gomerthegoose before reusing the design.