

Melty mount
Some bits for robots or other control applications
- Size
- 44 × 14 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 3
- Pads
- 13
- Tracks, vias
- 6, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20200811)
- Created
- 18 Mar 2022
- Updated
- 25 Feb 2022
Overview
Melty mount is an open-source printed circuit board by goktugh, from the goktugh/robotbits repository on GitHub. It is a 2-layer board of 44 × 14 mm with 5 parts on 3 nets, routed with 6 tracks and 0 vias.
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x03_Male | Connector_Wire:SolderWire-1sqmm_1x03_P5.4mm_D1.4mm_OD2.7mm | J1, J2 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2 |
| 1 | MountingHole | melty:brushlessholes | H3 |
More from goktugh/robotbits
12- 2 layers124 × 67 mm

- 2 layers124 × 67 mm

- 4 layers83.5 × 61 mm

- 4 layers82 × 56.5 mm

- 4 layers82 × 61 mm

- 2 layers110 × 48 mm

- 4 layers32 × 58 mm

- 2 layers52 × 52 mm

- 2 layers77 × 39 mm

- 2 layers41 × 39 mm

- 4 layers19 × 32 mm

- 2 layers43.5 × 15 mm

Similar boards
- 2 layers98 × 27 mm

- 2 layers21 × 33 mm

24g2usb pico2w
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
5 parts1.7kApache-2.0 - 2 layers53.2 × 59.6 mm

A10 OLinuXino Lime Rev B SHIELD TEMPLATE
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
5 parts1.5k - 2 layers30 × 11 mm

Main control board servo tester
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
5 parts1.1k - 2 layers78.8 × 35.3 mm

KiCadTest
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts915 - 2 layers50 × 23 mm

- 2 layers43.2 × 28.5 mm

- 2 layers20.3 × 15.2 mm

L0 light sensor
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
5 parts546MIT
Questions
How big is the Melty mount PCB?
It measures 44 × 14 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Melty mount use?
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Melty mount KiCad files?
From the goktugh/robotbits repository on GitHub, at the commit this page was made from: the board is melty/hardware/melty-mount/melty-mount.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Melty mount design in my own project?
Its repository states no licence, so its author keeps all rights: ask goktugh before reusing the design.