Skip to the content
4 layers35 × 33.5 mmBeetleback cg3, the printed circuit board in 3D

Beetleback cg3

goktugh/robotbits

Some bits for robots or other control applications

Size
35 × 33.5 mm
Copper layers
4
Thickness
1.6 mm
Parts
34
Nets
22
Pads
120
Tracks, vias
271, 45
Pours
4
Routed
Yes
KiCad
KiCad 5 (file 20210824)
Created
18 Mar 2022
Updated
25 Feb 2022

Overview

Beetleback cg3 is an open-source printed circuit board by goktugh, from the goktugh/robotbits repository on GitHub. It is a 4-layer board of 35 × 33.5 mm with 34 parts on 22 nets, routed with 271 tracks and 45 vias.

It is built around the HT7550-2, HT75C0-3 and B5819W, with the IRF8313PBF among its other parts. Its parts include 9 capacitors, 6 resistors, 5 ICs, 5 connectors and 3 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

4

Parts

34
QtyValueFootprintReferences
61uF 25vCapacitor_SMD:C_0402_1005MetricC1, C2, C3, C4, C8, C9
410RResistor_SMD:R_0402_1005MetricR2, R3, R5, R6
322uF 25vCapacitor_SMD:C_1206_3216MetricC5, C6, C7
21kResistor_SMD:R_0402_1005MetricR1, R4
2ADP3110APackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU2, U4
2B5819WDiode_SMD:D_SOD-123D1, D3
2IRF8313PBFPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmQ1, Q2
1ATTINY10-TSHRPackage_TO_SOT_SMD:SOT-23-6_HandsolderingU1
1HT7550-2Package_TO_SOT_SMD:SOT-23-5U3
1HT75C0-3Package_TO_SOT_SMD:SOT-23-5U5
1Red LEDLED_SMD:LED_0603_1608MetricD2
1motor_pad_1beetleback:bbb_motorpinJ3
1motor_pad_2beetleback:bbb_motorpinJ4
1powerinbeetleback:beetlepower_inJ2
1prog_pinsbeetleback:pogopins_5J5
1signalinbeetleback:rx_pinsJ1

The 30 most common of 34 parts.

More from goktugh/robotbits

12
  • 2 layers124 × 67 mmOutput.panel16, the printed circuit board in 3D

    Output.panel16

    goktugh/robotbits

    Some bits for robots or other control applications

    266 parts
  • 2 layers124 × 67 mmPanel16, the printed circuit board in 3D

    Panel16

    goktugh/robotbits

    Some bits for robots or other control applications

    208 parts
  • 4 layers83.5 × 61 mmBb panel6, the printed circuit board in 3D

    Bb panel6

    goktugh/robotbits

    Some bits for robots or other control applications

    156 parts
  • 4 layers82 × 56.5 mmBeetletriple x1, the printed circuit board in 3D

    Beetletriple x1

    goktugh/robotbits

    Some bits for robots or other control applications

    85 parts
  • 4 layers82 × 61 mmBeetletriple, the printed circuit board in 3D

    Beetletriple

    goktugh/robotbits

    Some bits for robots or other control applications

    76 parts
  • 2 layers110 × 48 mmBdregpanel, the printed circuit board in 3D

    Bdregpanel

    goktugh/robotbits

    Some bits for robots or other control applications

    70 parts
  • 4 layers32 × 58 mmBeetledouble, the printed circuit board in 3D

    Beetledouble

    goktugh/robotbits

    Some bits for robots or other control applications

    69 parts
  • 2 layers52 × 52 mmShinything, the printed circuit board in 3D

    Shinything

    goktugh/robotbits

    Some bits for robots or other control applications

    65 parts
  • 2 layers77 × 39 mmFeatheresc logic2, the printed circuit board in 3D

    Featheresc logic2

    goktugh/robotbits

    Some bits for robots or other control applications

    58 parts
  • 2 layers41 × 39 mmPanel4, the printed circuit board in 3D

    Panel4

    goktugh/robotbits

    Some bits for robots or other control applications

    52 parts
  • 4 layers19 × 32 mmMalenki nanoi, the printed circuit board in 3D

    Malenki nanoi

    goktugh/robotbits

    Some bits for robots or other control applications

    45 parts
  • 2 layers43.5 × 15 mmMelty controller-2, the printed circuit board in 3D

    Melty controller-2

    goktugh/robotbits

    Some bits for robots or other control applications

    40 parts

Similar boards

  • 2 layers80 × 35 mmVORON V2.0-Expander, the printed circuit board in 3D

    VORON V2.0-Expander

    thebrakshow/VORON-V2.0-Expander

    Expansion PCB to add 3 additional stepper drivers and 2 external PWM fans to a standard RAMPS 1.4 shield

    37 parts6
  • 4 layers74 × 104 mmBeepy, the printed circuit board in 3D

    Beepy

    sqfmi/beepy-hardware

    Beepy Hardware

    160 parts348MIT
  • 4 layers55 × 55 mmRBoard, the printed circuit board in 3D

    RBoard

    pms67/LittleBrain-STM32F4-Sensorboard

    STM32F4-based PCB interfacing with a variety of sensors.

    90 parts339
  • 4 layers140 × 100 mmDc usv, the printed circuit board in 3D

    Dc usv

    TobleMiner/DC-UPS

    A small DC UPS, designed to keep small appliances like consumer network equipment running during power outages

    351 parts223CERN-OHL-P-2.0
  • 4 layers70 × 43 mmUSMU v10, the printed circuit board in 3D

    USMU v10

    joeltroughton/uSMU

    Credit card-sized, USB-powered 4 quadrant source-measure unit hardware and firmware

    137 parts187
  • 2 layers100 × 100 mmHeatplate v1.1, the printed circuit board in 3D

    Heatplate v1.1

    DerSpatz/PCB-reflow-solder-heat-plate

    hardware design for a PCB reflow solder heat plate

    57 parts179MIT
  • 2 layers87.6 × 73 mmStemcell panel, the printed circuit board in 3D

    Stemcell panel

    megamind4089/STeMCell

    STM32F4 breakout board in pro micro pinout. Designed mainly for ergo split keyboards.

    258 parts123

Questions

How big is the Beetleback cg3 PCB?

It measures 35 × 33.5 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Beetleback cg3 use?

34 parts, built around the HT7550-2, HT75C0-3, B5819W and IRF8313PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Beetleback cg3 KiCad files?

From the goktugh/robotbits repository on GitHub, at the commit this page was made from: the board is beetleback_cg3/beetleback_cg3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Beetleback cg3 design in my own project?

Its repository states no licence, so its author keeps all rights: ask goktugh before reusing the design.