2 layers140.3 × 65 mm
2 layers
Volume
Gninnorg/ThePreamp- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 24
- Pads
- 68
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 6 (file 20211014)
- Created
- 10 May 2023
- Updated
- 31 Oct 2026
Overview
Volume is an open-source printed circuit board by Gninnorg, from the Gninnorg/ThePreamp repository on GitHub. It is a 2-layer board with 17 parts on 24 nets.
Its parts include 11 connectors, 5 capacitors and 1 IC.
README
Readme.mdTEst
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100 uf/25V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1, C2, C4, C6 |
| 2 | Audio In Left | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J5 |
| 2 | Audio In Right | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J6 |
| 1 | Buffer In Right | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | 10 uf/50V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C3 |
| 1 | Audio Power | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J3 |
| 1 | Buffer In Left | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | Buffer Out Left | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | Buffer Out Right | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | Buffer Power | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | Digital Power | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J4 |
| 1 | Muses_72323 | Muses72323v:SOP65P760X145-32N | U1 |
Questions
What parts does the Volume use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Volume KiCad files?
From the Gninnorg/ThePreamp repository on GitHub, at the commit this page was made from: the board is Hardware/Analogue/Volume/Volume.kicad_pcb and its schematic Hardware/Analogue/Buffer-Opamp/Buffer-Opamp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Volume design in my own project?
Its repository states no licence, so its author keeps all rights: ask Gninnorg before reusing the design.
More from Gninnorg/ThePreamp
8- 2 layers285 × 65 mm
- 2 layers128 × 85 mm
- 2 layers336 × 44.5 mm
- 2 layers
- 2 layers54.4 × 85 mm
- 2 layers140.3 × 65 mm
- 2 layers82.2 × 85 mm
Similar boards
- 2 layers50 × 35 mm
- 2 layers139.7 × 62.2 mm
- 2 layers29.2 × 55.9 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm
- 2 layers56.3 × 55.7 mm
StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm
SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm
- 2 layers36 × 51 mm
