

Uamsense
Artificial nose design with multimodal sensing capabilities
- Size
- 80 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 70
- Nets
- 56
- Pads
- 251
- Tracks, vias
- 764, 32
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 21 Apr 2023
- Updated
- 6 Oct 2025
Overview
Uamsense is an open-source printed circuit board by GNB-UAM, from the GNB-UAM/UAMSense repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 80 × 100 mm with 70 parts on 56 nets, routed with 764 tracks and 32 vias.
It is built around the ESP32-WROOM-32, R-78E5.0-0.5 and DHT22, with the LD1117S33TR(MS), BSS138 and BC858 among its other parts. Its parts include 24 resistors, 12 connectors, 10 capacitors, 7 transistors and 5 diodes. It belongs with the ESP32 boards of this library.
Main components
6ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesR-78E5.0-0.5
SIP,11.5x7.6mm-300mA、500mA -5V、5V 1 330uF、680uF 6.5V~36V、7V~31V 81%、90% Buck Short Circuit Protection SIP,11.5x7.6mm DC-DC Power Modules ROHSYLPTECDC-DC Power ModulesDHT22
插件-40℃~+80℃ 3.3V 5%RH~99%RH 500uA ±3%RH 插件 Temperature and Humidity Sensor ROHSHAIGUTemperature And Humidity SensorLD1117S33TR(MS)
SOT-223-20℃~+125℃@(Ta) 1 1.4V@(1A) 12V 1A 2mA 3.3V Fixed Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMSKSEMIVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsBC858
SOT-23SOT-23 Bipolar (BJT) ROHSHTBipolar Transistors - BJT
README
README.mdUAMSense electronic nose design
Artificial nose design with multimodal sensing capabilities.
These are experimental designs. Use at your own risk.
Please see Bibtex and other citation options at the bottom of the page.
UAMSense 4

UAMSense 3

UAMSense 2

UAMSense 1

UART-BME680

I2C-Sensors

License
For source code: GPLv3 https://www.gnu.org/licenses/gpl-3.0.en.html
For hardware: Attribution-ShareAlike 4.0 International https://creativecommons.org/licenses/by-sa/4.0/
© Carlos Garcia-Saura 2023
Cite as
Scientific papers:
- Garcia-Saura C., Rodriguez-Lujan I., Serrano E., Rodríguez F.B. and Varona P., At-home monitorization using artificial noses and multimodal sensors: a noninvasive approach to human routine certification. IBJ Plus 2022 1(s5) e00017. DOI: 10.24217/2531- 0151.22v1s5.00017. https://doi.org/10.24217/2531-0151.22V1S5.00017
PhD Thesis:
@phdthesis{garciasaura2023,
title={Exploration and characterization of environments under uncertainty using multimodal sensors},
author={Garcia-Saura, Carlos},
year={2023},
school={Escuela Politecnica Superior, Universidad Autonoma de Madrid}
}UAMSense project (this repository):
@misc{uamsense2023,
author = {Garcia-Saura, Carlos},
title = {UAMSense electronic nose design},
publisher = {GitHub},
year = {2023},
doi = {10.5281/ZENODO.10442698},
url = {https://doi.org/10.5281/zenodo.10442698}
}Parts
70| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10u | Capacitors_SMD:C_1206 | C1, C2, C3, C4, C5, C7, C8 |
| 5 | BSS138 | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2, Q5, Q6, Q7 |
| 5 | R | Resistors_SMD:R_0805 | R16, R17, R19, R21, R23 |
| 4 | Rtgs | Resistors_Universal:Resistor_SMD+THTuniversal_0805to1206_RM10_HandSoldering | R4, R20, R22, R24 |
| 4 | TGS2600 | TO_SOT_Packages_THT:TO-5-4 | B1, B2, B3, B4 |
| 3 | 3.3V | Diodes_SMD:D_1206 | D2, D4, D5 |
| 2 | 1u | Capacitors_SMD:C_0805 | C9, C10 |
| 2 | 33u | Inductors_NEOSID:Neosid_Inductor_SM-NE30_SMD1210 | L1, L2 |
| 2 | BC858 | TO_SOT_Packages_SMD:SOT-23 | Q3, Q4 |
| 2 | D_Schottky | Diodes_SMD:D_SMA_Standard | D1, D3 |
| 2 | Rrad | Resistors_SMD:R_0805 | R10, R11 |
| 1 | 100n | Capacitors_SMD:C_0805 | C6 |
| 1 | 10k | Resistors_SMD:R_0805 | R18 |
| 1 | 1M | Resistors_SMD:R_0805 | R5 |
| 1 | BOOT | Buttons_Switches_SMD:SW_SPST_EVQQ2 | SW2 |
| 1 | CDM4161A | Socket_Strips:Socket_Strip_Angled_1x05_Pitch2.54mm | P6 |
| 1 | CDM7160 | Socket_Strips:Socket_Strip_Straight_1x05_Pitch2.54mm | P4 |
| 1 | DHT22 | Socket_Strips:Socket_Strip_Straight_1x04_Pitch2.54mm | P3 |
| 1 | DSM501A | Socket_Strips:Socket_Strip_Straight_1x05_Pitch2.54mm | P5 |
| 1 | ESP32-WROOM | esp32:ESP32-WROOM | U3 |
| 1 | I2C | Socket_Strips:Socket_Strip_Straight_1x04_Pitch2.54mm | P8 |
| 1 | LD1117S33TR | TO_SOT_Packages_SMD:SOT-223 | U2 |
| 1 | POWER | Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_2pol | P1 |
| 1 | Photores | Resistors_ThroughHole:R_Radial_Power_L12.0mm_W8.0mm_P5.00mm | R7 |
| 1 | R-78E5.0-0.5 | mplewis:R-78E5.0-0.5 | U1 |
| 1 | R1batt | Resistors_SMD:R_0805 | R1 |
| 1 | R1co2a | Resistors_SMD:R_0805 | R12 |
| 1 | R1co2d | Resistors_SMD:R_0805 | R14 |
| 1 | R2batt | Resistors_SMD:R_0805 | R2 |
| 1 | R2co2a | Resistors_SMD:R_0805 | R13 |
| 1 | R2co2d | Resistors_SMD:R_0805 | R15 |
| 1 | RESET | Buttons_Switches_SMD:SW_SPST_EVQQ2 | SW1 |
| 1 | RF_Shield_One_Piece | Shielding_Cabinets:Laird_Technologies_BMI-S-107_44.37x44.37mm | J1 |
| 1 | Rdoor | Resistors_SMD:R_0805 | R9 |
| 1 | Rdust | Resistors_SMD:R_0805 | R6 |
| 1 | Rlight | Resistors_SMD:R_0805 | R8 |
| 1 | Rmic | Resistors_SMD:R_0805 | R3 |
| 1 | SERIAL | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | P9 |
| 1 | backplaneSelect | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | P10 |
| 1 | door | Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_2pol | P7 |
| 1 | inner electrode | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | J2 |
| 1 | mic | Socket_Strips:Socket_Strip_Straight_1x02_Pitch2.54mm | P2 |
The 69 most common of 70 parts.
More from GNB-UAM/UAMSense
6- 2 layers69.7 × 95.9 mm

- 2 layers74.7 × 65.3 mm

- 2 layers71.1 × 52.8 mm

- 2 layers35.8 × 29.3 mm

- 2 layers13.6 × 17.3 mm

I2c sensors
GNB-UAM/UAMSense
Artificial nose design with multimodal sensing capabilities
10 parts4GPL-3.0 - 2 layers11 × 17.4 mm

I2c sensors
GNB-UAM/UAMSense
Artificial nose design with multimodal sensing capabilities
8 parts4GPL-3.0
Similar boards
- 2 layers74.9 × 40.6 mm

Anavi thermometer
AnaviTechnology/anavi-thermometer
WiFi Smart Thermometer with ESP8266, DHT22, DS18B20, OLED display and slots for up to 3 I2C sensor modules
25 parts17 - 2 layers100 × 100 mm

COPIE 0
AssaadMH/shadow-4wd-motor-shield-pcb
The 24-signal interface board that replaces SHADOW's perfboard wiring — and the two pin conflicts that only appeared on re-checking the spec.
154 parts2MIT - 4 layers90 × 70 mm

- 2 layers44 × 44 mm

- 2 layers111.8 × 37.5 mm

- 4 layers66.8 × 59.2 mm

Miners Safety Helmet
edgeggrr/Miners-Safety-Helmet
An IoT-based wearable safety helmet designed to enhance underground miner safety through multi-sensor hazard detection, real-time audio-visual alerts, and cloud telemetry via ThingSpeak.
33 parts3MIT - 2 layers51.6 × 75.9 mm

- 2 layers60 × 40 mm

Cargofy IoT Node
Afuu-coder/Cargofy
🚚 Cargofy — AI-Powered Cold Chain Intelligence Platform | Autonomous Rerouting Agent | Google ADK | ULIP Integration | FAR AWAY 2026 Hackathon
41 parts
Questions
How big is the Uamsense PCB?
It measures 80 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Uamsense use?
70 parts, built around the ESP32-WROOM-32, R-78E5.0-0.5, DHT22 and LD1117S33TR(MS). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Uamsense KiCad files?
From the GNB-UAM/UAMSense repository on GitHub, at the commit this page was made from: the board is UAMSense2/uamsense.kicad_pcb and its schematic I2C-Sensors/i2c_sensors.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Uamsense design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).