

Reticulum hat
SpinalHDL implementation of ASIC hardware for go-reticulum
- Size
- 65 × 56 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 30
- Pads
- 113
- Tracks, vias
- 1, 6
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Sep 2026
- Updated
- 17 Sep 2026
Overview
Reticulum hat is an open-source printed circuit board by gmlewis, from the gmlewis/asic-reticulum repository on GitHub. It is a 2-layer board of 65 × 56 mm with 16 parts on 30 nets, routed with 1 track and 6 vias.
It is built around the E22-900M22S, AP2112K-3.3 and DMG2305UX, with the TP4056 among its other parts.
Main components
4E22-900M22S
SMD,20x14mm-147dBm 119mA 2.5V~3.7V 22.3dBm 6.8mA 7km Continuous frequency coverage FSK、LoRa SPI Stamp Hole Antenna、IPEX interface SMD,20x14mm LoRa Modules ROHSChengdu Ebyte Elec TechLoRa ModulesAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedDMG2305UX
SOT-23-55℃~+150℃ 1 P-Channel 1.7W 190pF 1V 20V 4.1A 52mΩ@4.5V 7.8nC 740pF P-Channel SOT-23 MOSFETs ROHSTECH PUBLICMOSFETsTP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery Management
README
hw/pcb/reticulum-hat/README.mdUniversal Reticulum Hat & Carrier
An Open-Hardware Companion Board for the Reticulum Network Stack with Hardware Cryptographic Acceleration, LoRa Mesh, and Dual-Host Support.
Overview
The Universal Reticulum Hat is a high-reliability hardware platform designed to give any Reticulum enthusiast, developer, or emergency responder an instant, pocketable Reticulum communicator.
It bridges the software Reticulum ecosystem (gonomadnet, gorrcd, rnsd) with cutting-edge silicon acceleration (the asic-reticulum Tiny Tapeout ASIC and Gowin Tang Primer 25K FPGA accelerator).
+---------------------------------------+
| Universal Reticulum Hat |
| |
[ Raspberry Pi ]<--->| [ 3-Way Jumper Multiplexing Block ] |
(Form Factor A) | | | | |
| v v v |
[ ESP32-C5 / ]<--->| [SX1262 LoRa] [ASIC Socket] [ST7789 & |
Heltec V4 ] | (+22/+28 dBm) (7-pin QSPI) CardKB] |
(Form Factor B) +---------------------------------------+
|
[ USB-C / LiPo Charger ]
[ AP2112K-3.3 Power-Path]Key Capabilities:
- Dual-Host Support:
- Form Factor A (Pocket Linux Terminal): Directly stacks on a Raspberry Pi Zero 2W or Milk-V Duo S via standard 40-pin header. Runs full Linux,
gonomadnetTUI,gorrcdmesh chat server, andrnsd. - Form Factor B (All-in-One Communicator): Accepts an Espressif ESP32-C5-DevKitC-1 (dual-band 2.4/5 GHz Wi-Fi 6 RISC-V) or Heltec WiFi LoRa 32 V4 (ESP32-S3 + +28 dBm PA) daughterboard.
- Form Factor A (Pocket Linux Terminal): Directly stacks on a Raspberry Pi Zero 2W or Milk-V Duo S via standard 40-pin header. Runs full Linux,
- Hardware Crypto Socket: Dedicated 10-pin ($2\times 5$) header supporting the
asic-reticulum7-pin QSPI + IRQ# protocol. Offloads Ed25519 signatures ($140\times$ faster than software), X25519 key exchanges ($105\times$ faster), SHA-256/512 ($45\times$ faster), and AES-128 ($40\times$ faster). - Semtech SX1262 LoRa Radio: Onboard EBYTE E22-900M22S (+22 dBm, ~160 mW) with 50-ohm controlled impedance coplanar waveguide to edge-mount SMA and internal u.FL antenna jacks.
- Display & Keyboard UI:
- Direct mounting header and FPC ribbon for ST7789 2.8" $320\times 240$ SPI TFT LCD with PWM backlight dimming.
- JST-SH STEMMA QT / Qwiic port and Dupont header for M5Stack CardKB (50-key tactile QWERTY keyboard) or BB Q10 I2C keyboard.
- Uninterruptible Power Subsystem:
- USB-C power input with dual 5.1k CC pull-downs (compatible with all PD and USB-A chargers).
- Integrated TP4056 1A linear LiPo battery charger with dual charge status LEDs.
- Zero-drop DMG2305UX P-MOSFET auto-switching power path (seamlessly transitions between USB-C and battery without system reboot).
- AP2112K-3.3 ultra-low-noise 600mA LDO regulator for crystal-clean RF and crypto logic rails.
Hardware Architecture & Project Structure
hw/pcb/reticulum-hat/
├── reticulum-hat.kicad_pro # Top-level KiCad 8 Project File
├── reticulum-hat.kicad_sch # Master Hierarchical Schematic Sheet
├── schematics/
│ ├── power.kicad_sch # USB-C, TP4056 Charger, DMG2305UX Power Path, AP2112K LDO
│ ├── esp32c5_socket.kicad_sch # Dual 22-pin Female Sockets for ESP32-C5 / Heltec V4
│ ├── pi_header.kicad_sch # Raspberry Pi 40-Pin Stacking Female Header
│ ├── lora_sx1262.kicad_sch # EBYTE E22-900M22S SX1262 Module & 50-Ohm RF Traces
│ ├── crypto_socket.kicad_sch # 10-Pin (2x5) QSPI + Dedicated IRQ Header for ASIC/FPGA
│ ├── display_keypad.kicad_sch # ST7789 2.8" TFT LCD & STEMMA QT CardKB Interface
│ └── bus_mux.kicad_sch # 3-Way Jumper Multiplexing Blocks (Host A vs Host B)
├── BOM.md # Formatted Component Bill of Materials & Sourcing Guide
├── BOM.csv # JLCPCB & PCBWay SMT Automated Assembly Pick-List
├── PINOUT-MATRIX.md # Complete Pin Routing Table for Pi Zero, C5, and Heltec V4
└── README.md # Hardware Manual & Ordering Guide (This File)Operating Modes & Jumper Configuration
Peripheral lines are routed via 19 standard 3-pin $2.54\text{ mm}$ male headers (JP1 through JP19) with 2-pin shunt jumpers:
Pin 1 (Host A: Pi) --- Pin 2 (Device Bus) --- Pin 3 (Host B: MCU)1. Mode A: Form Factor A (Raspberry Pi Zero 2W Host)
- Board Setup: Install the Raspberry Pi Zero 2W under or over the Hat using an extra-tall 40-pin stacking header. Leave the MCU socket headers empty.
- Jumper Positions:
JP_LORA1..6: Shunts on Pins 1-2 (connects EBYTE SX1262 to Pi SPI0).JP_CRP1..7: Shunts on Pins 1-2 (connects Crypto Socket to Pi SPI1 + GPIO24 IRQ).JP_UI1..6: Shunts on Pins 1-2 (connects ST7789 LCD and CardKB to Pi I2C1 + GPIO).
- Software: Boot Raspberry Pi OS Lite, run
rnsd,gorrcd, andgonomadnet.
2. Mode B1: Form Factor B (ESP32-C5 Host + Onboard EBYTE LoRa)
- Board Setup: Plug an ESP32-C5-DevKitC-1 into the two 22-pin female socket headers. Leave the Pi 40-pin header unpopulated.
- Jumper Positions:
JP_LORA1..6: Shunts on Pins 2-3 (connects EBYTE SX1262 to ESP32-C5 SPI).JP_CRP1..7: Shunts on Pins 2-3 (connects Crypto Socket to ESP32-C5 QSPI).JP_UI1..6: Shunts on Pins 2-3 (connects LCD and CardKB to ESP32-C5 I2C/SPI).
- Software: Flash ESP-IDF firmware with FreeRTOS Reticulum client, 5 GHz Wi-Fi 6 AP, and ST7789 display driver.
3. Mode B2: Form Factor B (Heltec WiFi LoRa 32 V4 Host)
- Board Setup: Plug a Heltec WiFi LoRa 32 V4 into the socket headers. Do NOT populate the onboard EBYTE LoRa module (the Heltec board already has its own +28 dBm SX1262 and IPEX antenna).
- Jumper Positions:
JP_LORA1..6: REMOVE ALL SHUNTS (LEAVE OPEN).JP_CRP1..7: Shunts on Pins 2-3 (connects Crypto Socket to Heltec GPIOs).JP_UI1..6: Shunts on Pins 2-3 (connects CardKB and ST7789 to Heltec GPIOs).
Manufacturing & Ordering Instructions
The design files are 100% turnkey ready for both JLCPCB and PCBWay.
Option 1: JLCPCB SMT Assembly (Recommended for Budget / Fast Prototyping)
- In KiCad 8, open
reticulum-hat.kicad_pro. - Generate Fabrication Outputs:
- Gerbers (
.gbr) and Excellon Drill files (.drl), compressed into a singleGerber_Universal_Reticulum_Hat_v1.0.zip. - BOM: Export using the provided
hw/pcb/reticulum-hat/BOM.csv. - CPL (Component Placement List): Export centroid file (
.pos/.csv).
- Gerbers (
- On JLCPCB.com:
- Upload
Gerber_Universal_Reticulum_Hat_v1.0.zip. - Select 2 Layers, Thickness: 1.6mm, Surface Finish: ENIG (Electroless Nickel Immersion Gold — essential for high-frequency RF pads).
- Select PCB Assembly (SMT): Single-side top surface assembly.
- Upload
BOM.csvandCPL.csv. All LCSC part numbers inBOM.csvmatch JLCPCB "Basic" and "Preferred" components automatically!
- Upload
Option 2: PCBWay Turnkey Assembly (Recommended for Premium Quality / Custom Options)
- On PCBWay.com:
- Choose PCB Instant Quote.
- Dimensions: $65.0\text{ mm} \times 56.0\text{ mm}$, 2 Layers, $1.6\text{ mm}$ thickness, 1 oz Copper.
- Surface Finish: ENIG (Immersion Gold).
- Silkscreen: White on Black (or your preferred color).
- Check SMT Assembly.
- Upload Gerber archive,
BOM.md/BOM.csv, and Centroid file. - PCBWay’s engineering team will match all passives and connectors using DigiKey/Mouser part numbers provided in
BOM.md.
Mechanical Assembly & 3D Printable Enclosure
The Universal Reticulum Hat adheres strictly to the Raspberry Pi HAT Mechanical Specification:
- Dimensions: $65.0\text{ mm} \times 56.0\text{ mm}$ with $3.5\text{ mm}$ radius rounded corners.
- Mounting Holes: 4 $\times$ $M2.5$ screw holes spaced at $58.0\text{ mm} \times 49.0\text{ mm}$.
- Standoffs: Use 11 mm female-to-female $M2.5$ brass hex standoffs when stacking on a Raspberry Pi Zero 2W.
- Enclosure Design: An open-source 3D printable handheld clamshell enclosure (STL and STEP files in
hw/cad/) holds the complete stack:- Bottom tray: Raspberry Pi Zero 2W / ESP32-C5 and 3.7V 1200mAh LiPo pouch cell.
- Middle tier: Universal Reticulum Hat with SMA antenna protruding from the top edge.
- Top bezel: Flush-mount cutouts for the 2.8" TFT LCD and snap-fit holder for the M5Stack CardKB keyboard.
License & Open Hardware
Designed and distributed under the CERN Open Hardware Licence Version 2 - Strongly Reciprocal (CERN-OHL-S).
Copyright (c) 2026 Glenn Lewis and Contributors.
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | — | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J_MCU_L, J_MCU_R |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U_REG |
| 1 | Crypto_QSPI_IRQ | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J_CRYPTO |
| 1 | DMG2305UX | Package_TO_SOT_SMD:SOT-23 | Q_PWR |
| 1 | E22-900M22S | Module:EBYTE_E22-900M22S | U_LORA |
| 1 | LiPo_Battery | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J_BAT |
| 1 | Raspberry_Pi_40Pin | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J_PI |
| 1 | SMA_Edge_Mount | Connector_Coaxial:SMA_Amphenol_132136_EdgeMount | J_SMA |
| 1 | STEMMA_QT_CardKB | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J_STEMMA |
| 1 | TP4056 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U_CHG |
| 1 | — | Connector_USB:USB_C_Receptacle_GCT_USB4105 | J_USB |
The 12 most common of 16 parts.
Similar boards
- 4 layers78 × 46.3 mm

- 2 layers83 × 100 mm

Wasbeer communicator
FunDeckHermit/hw-communicator
Devices that can communicate state to one another.
21 parts1MIT - 4 layers84.9 × 74.8 mm

- 2 layers78.8 × 36.6 mm

IRIS-868
StringLess80/IRIS-868
IRIS-868 is a custom embedded RF platform based on the STM32F303RET6 microcontroller and Semtech LLCC68 sub-GHz transceiver, designed for 868 MHz ISM-band wireless communication.
53 parts1 - 2 layers47 × 45 mm

- 2 layers139 × 113 mm

- 4 layers50 × 50 mm

HARPY REV2
lewipewi/harpy-board
Hard real-time sequencer and power hub for a Canopy Hunter hopping robot (coming soon!). Drives four servos and one brushed motor, holds attitude across a 512 ms ballistic arc, charges the cell, and logs every hop to…
85 parts - 2 layers33 × 54.2 mm

ESP32-C3 Sensor
pellematrose/ESP32-C3_Sensor
Sensor Board to read PT100, show on Display, Broadcast over MQTT
96 parts
Questions
How big is the Reticulum hat PCB?
It measures 65 × 56 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Reticulum hat use?
16 parts, built around the E22-900M22S, AP2112K-3.3, DMG2305UX and TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Reticulum hat KiCad files?
From the gmlewis/asic-reticulum repository on GitHub, at the commit this page was made from: the board is hw/pcb/reticulum-hat/reticulum-hat.kicad_pcb and its schematic hw/pcb/reticulum-hat/reticulum-hat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Reticulum hat design in my own project?
Its repository states no licence, so its author keeps all rights: ask gmlewis before reusing the design.