Skip to the content
2 layers32 × 43 mmSZSERVOEXTENDER, the printed circuit board in 3D

I made a massive PCB which is a PI Hat for my robotic arm. I really wanted to streamline everything and shrink it down and make it more reliable so I made this. It's really cool.

Size
32 × 43 mm
Copper layers
2
Thickness
1.6 mm
Parts
4
Nets
4
Pads
12
Tracks, vias
43, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
7 Oct 2026
Updated
25 Oct 2026

Overview

SZSERVOEXTENDER is an open-source printed circuit board by gmaxdragon, from the gmaxdragon/Modular-Pi-Hat repository on GitHub. It is a 2-layer board of 32 × 43 mm with 4 parts on 4 nets, routed with 43 tracks and 0 vias.

Its parts include 3 connectors and 1 capacitor.

README

README.md

Modular PI HAT

24 October 2026 technical audit: Both the main KiCad project and servo-extender KiCad project, plus their separate Gerber/drill packages, are present in this repository. These are unassembled design files. The archived $79.05 figure includes $30 estimated shipping, excludes tax and unlisted material, and is not a live manufacturing quote. The selected 2A servo fuse, 3.3V regulator thermal/load margin, USB connector land pattern, stacking/header clearances and 4-wire extender cable still require physical review before energizing the robot. The OLED pin sequence differs from J10 and must be individually remapped, never plugged directly. Detailed engineering release gates. This note is technical and leaves the owner's original project narrative intact.

What I made

I made a massive PCB which is a PI Hat for my robotic arm. I really wanted to streamline everything and shrink it down and make it more reliable so I made this. It's really cool.

What it does

The big board is a massive PI Hat that can control servos, attach to sensors, and connect to the mini board which is connected by a big cable to the main board on screw terminals and it controls 2 servos for the wrist and gripper.

Why I made it

I made it because I was having a ton of difficulties making everything move correctly and everything was all over the place. It's way simpler, easy to use, and reliable.

My work and what I learned

I personally worked on the schematics and routing and basically, I added all the components, added power symbols, added net labels, and multiple more stuff and routed and adjusted the whole PCB. I worked through a lot of problems such as the ERCs not budging, a ton of short circuits reported in the DRC and a ton of more annoying problems. However, I learned the whole flow of how to make a schematic and a PCB and it feels really good now.

Current status

Currently, the whole board is finished. The schematics, the routing, and testing is all good now. Nothing has been made as of now and I need to test it out and solder it once it comes.

Help and sources

I used AI a ton in order to guide me with making the full thing and giving me instructions on how to fix some errors. Mostly, I used the ERC and DRC a ton as it's extremely helpful for me and it pinpoints where all the errors are and I used the help of some friends in school to tell me what to do. Honestly, AI helped with making the schematics and telling me what parts I need and researching meanwhile I did the work, it helped me with organizing and kicking off routing the board, it helped me when there was annoying footprint issues, and a ton of error fixing and instructions.

Journal note

Hey, I accidentally added Week 3 one of the journal entries here, don't mind it please. I couldn't find a way to remove it.

Bill of materials

PCB fabrication is $4.00 per board. This table includes one main PCB and one servo-extender PCB. Shipping remains the existing $30.00 estimate.

ItemQtySupplierCost/item (USD)Total cost (USD)Link
ESP32-S3-WROOM-1-N8R8 module, 8MB flash + 8MB PSRAM1Mouser$6.28$6.28Part
AP2112K-3.3 3.3 V LDO regulator1DigiKey$0.28$0.28Part
40-pin extra-tall 2x20 female stacking header1DigiKey$2.95$2.95Part
4-way 5.08 mm Phoenix screw terminal2DigiKey$2.28$4.56Part
2-way 5.08 mm Phoenix screw terminal1DigiKey$1.16$1.16Part
Breakaway 0.1 inch male pin header strips, 10-pack1DigiKey$4.95$4.95Part
USB-C USB2.0 receptacle1DigiKey$0.80$0.80Part
470 uF 10 V through-hole capacitor1DigiKey$0.71$0.71Part
100 uF 25 V through-hole capacitor1DigiKey$0.87$0.87Part
22 uF 10 V 1206 ceramic capacitor1DigiKey$0.47$0.47Part
1 uF 50 V 0805 ceramic capacitor3DigiKey$0.18$0.54Part
100 nF 50 V 0805 ceramic capacitor1DigiKey$0.10$0.10Part
10k 1 percent 0805 resistor4DigiKey$0.10$0.40Part
5.1k 1 percent 0805 resistor2DigiKey$0.10$0.20Part
22 ohm 1 percent 0805 resistor2DigiKey$0.10$0.20Part
1k 1 percent 0805 resistor1DigiKey$0.10$0.10Part
75k 1 percent 0805 resistor1DigiKey$0.10$0.10Part
100k 1 percent 0805 resistor1DigiKey$0.11$0.11Part
4.7k 1 percent 0805 resistor2DigiKey$0.10$0.20Part
Green 0805 LED1DigiKey$0.19$0.19Part
SPST SMD tactile switch2DigiKey$0.21$0.42Part
Keystone mini blade through-hole fuse holder1DigiKey$1.31$1.31Part
Littelfuse MINI 297 2A 32V blade fuse, selected for prototype1DigiKey$0.39$0.39Part
0.91 inch white 128x32 SSD1306 I2C OLED breakout, DFRobot DFR06481DigiKey$9.90$9.90Part
4-position 2.54mm Samtec OLED female socket1DigiKey$1.11$1.11Part
6 inch male-to-female jumper cable kit, 20 wires, for OLED J10 pin-order correction1DigiKey$2.75$2.75Part
Main PCB fabrication, 1 bare board1JLCPCB$4.00$4.00Ordering reference
Servo extender PCB fabrication, 1 bare board1JLCPCB$4.00$4.00Ordering reference
Parts and boards subtotal$49.05
Estimated total shipping1$30.00
Total including estimated shipping$79.05

BOM.csv contains the same items and prices. bom.csv includes part numbers and assembly notes. Tax, customs and unlisted wiring costs are not included in the total above.

Design files

BoardSchematicPCBKiCad projectGerbers and drills
Main Pi HATSchematicPCBProjectZIP
Servo extenderSchematicPCBProjectZIP

Footprint library · Footprint library table · Journal · Parts and wiring notes · Fabrication notes

USB diagnostic firmware: AI-assisted; not compiled for the ESP32 target or tested on hardware yet.

Project images

Servo extender PCB

Servo extender design

Parts

4
QtyValueFootprintReferences
1100uFCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC1
1GRIPPER_SERVOConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3
1MAIN_CABLETerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_HorizontalJ1
1WRIST_SERVOConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ2

More from gmaxdragon/Modular-Pi-Hat

1
  • 2 layers65 × 56 mmTest1, the printed circuit board in 3D

    Test1

    gmaxdragon/Modular-Pi-Hat

    I made a massive PCB which is a PI Hat for my robotic arm. I really wanted to streamline everything and shrink it down and make it more reliable so I made this. It's really cool.

    41 parts1

Similar boards

  • 2 layers18.5 × 26 mm24g2usb rp2350zero, the printed circuit board in 3D

    24g2usb rp2350zero

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    4 parts1.7kApache-2.0
  • 2 layers116 × 33 mm966595-1 and 963356-1, the printed circuit board in 3D

    966595-1 and 963356-1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    4 parts1.2k
  • 2 layers19 × 18 mmDaughter board, the printed circuit board in 3D

    Daughter board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    4 parts915
  • 2 layers24.8 × 24.8 mmNrf24 breakout, the printed circuit board in 3D

    Nrf24 breakout

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    4 parts803MIT
  • 2 layers26 × 20 mmCap chain, the printed circuit board in 3D

    Cap chain

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    4 parts744MIT
  • 2 layers34.7 × 20 mmXG Station Power MSI, the printed circuit board in 3D

    XG Station Power MSI

    osy/XG_Mobile_Station

    Open source eGPU dock for ROG Ally and ROG Flow

    4 parts712CC-BY-4.0
  • 2 layers20.3 × 24.5 mmJack power input, the printed circuit board in 3D

    Jack power input

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    4 parts546MIT

Questions

How big is the SZSERVOEXTENDER PCB?

It measures 32 × 43 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SZSERVOEXTENDER use?

4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SZSERVOEXTENDER KiCad files?

From the gmaxdragon/Modular-Pi-Hat repository on GitHub, at the commit this page was made from: the board is hardware/servo-extender/SZSERVOEXTENDER.kicad_pcb and its schematic hardware/extender/SZSERVOEXTENDER.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SZSERVOEXTENDER design in my own project?

Its repository states no licence, so its author keeps all rights: ask gmaxdragon before reusing the design.