
ZArduino
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

Power meter for low power devices using LTC4150
CoulombMeter is an open-source printed circuit board by gmag11, from the gmag11/CoulombMeter repository on GitHub. It is a 2-layer board of 68 × 60 mm with 21 parts on 41 nets, routed with 215 tracks and 0 vias.
It is built around the ATMEGA328P-PU. Its parts include 12 connectors, 4 capacitors, 2 resistors, 1 IC and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Power meter for low power devices using LTC4150
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R1, R2 |
| 2 | 15n | Capacitors_ThroughHole:C_Disc_D3_P2.5 | C3, C4 |
| 2 | CONN_01X10 | Socket_Strips:Socket_Strip_Straight_1x10 | P2, P7 |
| 1 | 10n | Capacitors_ThroughHole:C_Disc_D3_P2.5 | C1 |
| 1 | 10u | Capacitors_ThroughHole:C_Radial_D6.3_L11.2_P2.5 | C2 |
| 1 | 8MHz | Crystals:Crystal_HC49-U_Vertical | Y1 |
| 1 | ATMEGA328P-P | Housings_DIP:DIP-28_W7.62mm | IC1 |
| 1 | CLR | Buttons_Switches_ThroughHole:SW_PUSH_SMALL | SW1 |
| 1 | CONN_01X06 | Socket_Strips:Socket_Strip_Straight_1x06 | P3 |
| 1 | CURRENT | Pin_Headers:Pin_Header_Angled_1x02_Pitch2.54mm | P12 |
| 1 | ICSP | Pin_Headers:Pin_Header_Angled_2x03 | P1 |
| 1 | INPUT | w_conn_gmkds:gmkds_3-2-7,62 | P9 |
| 1 | INPUT | Socket_Strips:Socket_Strip_Straight_1x02 | P6 |
| 1 | OUTPUT | w_conn_gmkds:gmkds_3-2-7,62 | P8 |
| 1 | OUTPUT | Socket_Strips:Socket_Strip_Straight_1x02 | P5 |
| 1 | Serial | Pin_Headers:Pin_Header_Straight_1x03 | P11 |
| 1 | Supply Sel | Pin_Headers:Pin_Header_Straight_1x03 | P10 |
| 1 | USB_OTG | Connect:USB_Micro-B | P4 |

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

coseyfannitutti/discipad
17-key numpad assembled with only through hole components, including usb type-c

matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

coseyfannitutti/romeo
Staggered 40% keyboard pcb that can be assembled with only through hole components, including USB Type-C

mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.


leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

It measures 68 × 60 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the ATMEGA328P-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gmag11/CoulombMeter repository on GitHub, at the commit this page was made from: the board is CoulombMeter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask gmag11 before reusing the design.