
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

Tiny 2-layer KiCad layout intended to minimise board area.
Altair xiao tiny is an open-source printed circuit board by gloveboxes, from the gloveboxes/Altair-8800-AI-Edition repository on GitHub, published under the MIT licence. It is a 2-layer board of 28 × 30 mm with 2 parts on 10 nets, routed with 53 tracks and 5 vias.
It belongs with the ESP32 and RISC-V boards of this library.
Tiny 2-layer KiCad layout intended to minimise board area.
Approximate board outline: 25.5 mm x 28.2 mm. This is close to the requested 28 mm x 25 mm envelope, but the 1x11 2.54 mm header alone spans 25.4 mm, so one board dimension must be slightly over 27 mm once edge clearance is included.
| Altair header | Signal | XIAO pin | ESP32-S3 GPIO |
|---|---|---|---|
| 1 | LOAD | D0 | GPIO1 |
| 2 | SWITCH_CS | D1 | GPIO2 |
| 4 | MISO | D9 | GPIO8 |
| 5 | MOSI | D10 | GPIO9 |
| 6 | RESET / MR | D3 | GPIO4 |
| 7 | CLK / SCK | D8 | GPIO7 |
| 8 | LED_STORE | D4 | GPIO5 |
| 9 | LED_OE | D5 | GPIO6 |
| 10 | 3V3 | 3V3 | power |
| 11 | GND | GND | ground |
Pin 3 is unconnected.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | MCU_Seeed_ESP32C3 | RF_Module:MCU_Seeed_ESP32C3 | ESP32S3 |
| 1 | PinHeader_1x11_P2.54mm_Vertical | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Vertical |

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 28 × 30 mm and has 2 copper layers, 1.6 mm thick.
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gloveboxes/Altair-8800-AI-Edition repository on GitHub, at the commit this page was made from: the board is hardware/altair_xiao_tiny/altair_xiao_tiny.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).