Skip to the content
2 layers85.6 × 68.1 mmNFC BusinessCard, the printed circuit board in 3D

Business card on printed circuit board

Size
85.6 × 68.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
6
Pads
50
Tracks, vias
54, 4
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
5 Jan 2023
Updated
28 Sep 2023

Overview

NFC BusinessCard is an open-source printed circuit board by glennlopez, from the glennlopez/PCBusinessCard.EDA repository on GitHub, published under the MIT licence. It is a 2-layer board of 85.6 × 68.1 mm with 17 parts on 6 nets, routed with 54 tracks and 4 vias.

Its parts include 1 capacitor, 1 resistor and 1 diode. It belongs with the radio and wireless boards of this library.

README

README.md

NFC Enabled PCB Business Card

This is the ultimate business card in PCB form, designed to bridge the physical world with the digital. The front of the card has an NFC chip designed to hold enough information to store your contact info, url, email, and plain text. In the example video below, the NFC chip holds a url link to my github repository. Energy is harvested during a scan through the antenna and powers the LED.

On the back of the card is a QR code designed to act as backup for the NFC card in case you choose to have the NFC unpopulated. The back provides written contact info for a quick visual reference, allowing you to make a quick first impression.

Download the latest release here

GLENN LOPEZ PCB CARD

A good business card provides a perfect opportunity to impress a potential contact. It needs to stand out, and with this design it will not only stand out, but will also act as a phone stand. Perfect for those long airplane commutes.

Components

  • NFC chip 1kb XQFN-8 NT3H11W0FHKH
  • LED SMD 0805
  • 47R Resistor SMD 0603
  • 220nF Capacitor SMD 0603

image

NFC Antenna

NFC antenna is an open source class 4 attena design from NXP

  • Antenna loop is 2.75 uH
  • Energy harvesting output VOUT is used to power the NFC chip connected to VCC pin.

Production Samples

Parts

17
QtyValueFootprintReferences
4VAL**MouseBites:mouse-bite-2mm-slotmouse-bite-2mm-slot, mouse-bite-2mm-slot, mouse-bite-2mm-slot, mouse-bite-2mm-slot
2,
1NFC_BusinessCard:SML0805LED1
1220 nfNFC_BusinessCard:C0603C1
125X48MM_NFC_ANTENNANFC_BusinessCard:25X48MM_NFCANT0
147 ΩNFC_BusinessCard:R0603R1
1Contact InfoNFC_BusinessCard:MA08-1CONTACT INFO
1NT3HNFC_BusinessCard:XQFN8NT3H1101
1Order Number JLCPCBNFC_BusinessCard:Order Number JLCPCBJLCJLCJLCJLC

The 13 most common of 17 parts.

Similar boards

  • 2 layers50 × 35 mmServo power, the printed circuit board in 3D

    Servo power

    earthtojake/text-to-cad

    Design physical products with AI

    17 parts26kMIT
  • 2 layers139.7 × 62.2 mmBreakout 60pin EEC IV, the printed circuit board in 3D

    Breakout 60pin EEC IV

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    17 parts1.2k
  • 2 layers29.2 × 55.9 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    17 parts1kGPL-3.0
  • 2 layers24.5 × 36.5 mmCluster, the printed circuit board in 3D

    Cluster

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    17 parts993
  • 2 layers56.3 × 55.7 mmStarNecklace, the printed circuit board in 3D

    StarNecklace

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    17 parts915
  • 2 layers25 × 25 mmSmallEncoder, the printed circuit board in 3D

    SmallEncoder

    DDeGonge/OS-ARM

    This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…

    17 parts498MIT
  • 2 layers38.9 × 16.1 mmAmoeba spc, the printed circuit board in 3D

    Amoeba spc

    mtl/keyboard-pcbs

    Keyboard PCBs

    17 parts485
  • 2 layers36 × 51 mmABSIS ALE, the printed circuit board in 3D

    ABSIS ALE

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    17 parts431

Questions

How big is the NFC BusinessCard PCB?

It measures 85.6 × 68.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the NFC BusinessCard use?

17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the NFC BusinessCard KiCad files?

From the glennlopez/PCBusinessCard.EDA repository on GitHub, at the commit this page was made from: the board is PCBusinessCard/NFC_BusinessCard.kicad_pcb and its schematic PCBusinessCard/NFC_BusinessCard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the NFC BusinessCard design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).