Skip to the content
2 layers100.1 × 66.9 mmController32, the printed circuit board in 3D

Controller32

glecuy/BionX323

STM32 based controller for old Bionx ebike motor.

Size
100.1 × 66.9 mm
Copper layers
2
Thickness
1.58 mm
Parts
54
Nets
62
Pads
171
Tracks, vias
367, 31
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
11 Sep 2022
Updated
11 Nov 2025

Overview

Controller32 is an open-source printed circuit board by glecuy, from the glecuy/BionX32 repository on GitHub. It is a 2-layer board of 100.1 × 66.9 mm with 54 parts on 62 nets, routed with 367 tracks and 31 vias.

Its parts include 31 resistors, 13 capacitors, 5 connectors and 3 ICs. It belongs with the robots and motor control boards and the STM32 boards of this library.

README

README.md

BionX32 stm32 controller for BionX ebike motor

The BionX motor has originally a built-in controller. This project aims to replace embedde electronics by an external controller. Regular 24V controller with square waves doesn't provide good enough results, this is a new attempt with a FOC implementation.

Project Content

3 phases output,

3 hall sensors input,

One Shunt current measurement,

Interface for S866 Display.

PAS input,

Brake input

Core code is generated thanks to ST micro graphical tools. (X-CUBE-MCSDK) then adapted to STM32F103C8Tx

Hardware description

STM32 module MOSFET module Main pcb S866 display

Credits & Resources

STM32CubeIDE

STM32 MC SDK (motor control software development kit) : Gived up (Did not work for me)

Parts

54
QtyValueFootprintReferences
8100nFGG_Library:GG_C_0805C1, C2, C3, C4, C6, C7, C8, C13
61.5kGG_Library:GG_R_1206R1, R2, R4, R5, R6, R7
30GG_Library:GG_R_1206R26, R27, R28
310GG_Library:GG_R_1206R29, R30, R31
3100GG_Library:GG_R_1206R8, R9, R18
310nFGG_Library:GG_C_0805C9, C10, C12
34.7KGG_Library:GG_R_1206R13, R17, R19
21.5KGG_Library:GG_R_1206R15, R16
227KGG_Library:GG_R_1206R21, R24
23.3KGG_Library:GG_R_1206R22, R23
2470GG_Library:GG_R_1206R12, R14
1100pFGG_Library:GG_C_0805C11
110KGG_Library:GG_R_1206R10
115kGG_Library:GG_R_1206R3
11KGG_Library:GG_R_1206R11
1220GG_Library:GG_R_1206R25
1470MFGG_Library:GG_CP_L30.0mm_D15.0mm_HorizontalC5
168KGG_Library:GG_R_1206R20
1GG_Break_ConnX02GG_Library:GG_2Wires_P2.54mmJ4
1GG_ConverterDCDCGG_Library:GG_X0018_DCDCPS1
1GG_DisplayConnX05GG_Library:GG_5Wires_P2.54mmJ3
1GG_HALL_ConnX06GG_Library:GG_6Wires_P2.54mmJ1
1GG_LMV321Package_TO_SOT_SMD:SOT-23-6_HandsolderingU3
1GG_MosFet_ModuleGG_Library:GG_MOSFET_MouleU2
1GG_PAS_ConnX03GG_Library:GG_3Wires_P2.54mmJ5
1GG_STM32_ModuleGG_Library:GG_STM32_DIP-40U1
1GG_SerialConnX04GG_Library:GG_Serial04_P2.54mmJ2
1NTC 10KGG_Library:GG_2Wires_P2.54mmTH1

Similar boards

  • 2 layers203 × 26.6 mmBlade13, the printed circuit board in 3D

    Blade13

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    54 parts3.7k
  • 2 layers30 × 50 mmModuleV421, the printed circuit board in 3D

    ModuleV421

    stuartpittaway/diyBMSv4

    Version 4 of the diyBMS

    54 parts1.1k
  • 2 layers100.1 × 40 mm32Bit shift register, the printed circuit board in 3D

    32Bit shift register

    MaltWhiskey/Mega-Cube

    16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver

    54 parts766
  • 2 layers100 × 120 mmHubble lens, the printed circuit board in 3D

    Hubble lens

    wntrblm/Castor_and_Pollux

    A Juno-inspired dual oscillator

    54 parts587
  • 2 layersPassword, the printed circuit board in 3D

    Password

    limpkin/mooltipass

    Github repository dedicated to the mooltipass project

    54 parts531
  • 2 layers104.3 × 38.9 mmHYD ISO PANEL, the printed circuit board in 3D

    HYD ISO PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    54 parts431
  • 2 layers93.8 × 64.2 mmPiFinder smt, the printed circuit board in 3D

    PiFinder smt

    brickbots/PiFinder

    A plate solving telescope finder based around a Raspberry PI and RPI HQ Camera

    54 parts257GPL-3.0

Questions

How big is the Controller32 PCB?

It measures 100.1 × 66.9 mm and has 2 copper layers, 1.58 mm thick.

What parts does the Controller32 use?

54 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Controller32 KiCad files?

From the glecuy/BionX32 repository on GitHub, at the commit this page was made from: the board is HW/Controller32.kicad_pcb and its schematic HW/Controller32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Controller32 design in my own project?

Its repository states no licence, so its author keeps all rights: ask glecuy before reusing the design.