gitGNU/gnu_plussydisplayThis repository contains free software and hardware design components for a small LED matrix resembling FSFE's plussy mascot. It is intended to be used, e.g., as an eyecatcher for fellowship events.
Ws2812display is an open-source printed circuit board by gitGNU, from the gitGNU/gnu_plussydisplay repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 100 mm with 227 parts on 151 nets, routed with 1,835 tracks and 149 vias.
It is built around the MAX3485ED. Its parts include 98 capacitors, 89 ICs, 19 resistors, 10 connectors and 2 diodes. It belongs with the STM32 boards of this library.
This repository contains free software and hardware design components for a small LED matrix resembling FSFE's plussy mascot. It is intended to be used, e.g., as an eyecatcher for fellowship events.
All files in this project (except some configuration files where stated in their header) are licensed under the GPLv3 license as stated in the next section (GPLv3 License Statement).
Plussy Display Copyright (C) 2015 Christian Carlowitz chca@cmesh.de
This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/.
make ANIM=anim_funcname in folder sim to testgit submodule init, enter uc/libopencm3, run make)make or make V=1 (verbose) in folder ucmake flash or make flash V=1 (verbose) in folder uc| Qty | Value | Footprint | References |
|---|---|---|---|
| 91 | 100n | cc_rcl:rcl-cc-0603 | C103, C108, C109, C110, C111, C112, C113, C201, C202, C203, C204, C205, C206, C207, C208, C209 +75 |
| 64 | CC_WS2812B | cc_display:WS2812B | U201, U202, U203, U204, U205, U206, U207, U208, U209, U210, U211, U212, U213, U214, U215, U216 +48 |
| 20 | CC_WS2812B | cc_display:WS2812B_8MM | U265, U266, U267, U268, U269, U270, U271, U272, U273, U274, U275, U276, U277, U278, U279, U280 +4 |
| 6 | 10k | cc_rcl:rcl-cc-0603 | R104, R105, R114, R115, R116, R117 |
| 5 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | P102, P104, P105, P106, P107 |
| 3 | 100 | cc_rcl:rcl-cc-0603 | R101, R102, R110 |
| 3 | 100k | cc_rcl:rcl-cc-0603 | R106, R107, R108 |
| 3 | CC_MOUNT | cc_con-misc:CC_MOUNT_PLATED_M3 | M201, M202, M203 |
| 2 | 12p | cc_rcl:rcl-cc-0603 | C104, C105 |
| 2 | 1k | cc_rcl:rcl-cc-0603 | R201, R202 |
| 2 | 1u | cc_rcl:rcl-cc-0603 | C107, C114 |
| 2 | 1u/10V | cc_rcl:rcl-cc-0603 | C101, C102 |
| 2 | 470 | cc_rcl:rcl-cc-0603 | R103, R109 |
| 2 | CONN_01X02 | cc_con-lst:con-ria-TYPE_230_249_2PIN | P103, P110 |
| 2 | SW_PUSH | cc_switches:TASTER_3305B | SW101, SW102 |
| 2 | n.b. | cc_rcl:rcl-cc-0603 | R112, R113 |
| 1 | 0 | cc_rcl:rcl-cc-0603 | R111 |
| 1 | 12MHz | cc_rcl:Q_EUROQUARTZ_MJ_3x5x1 | X101 |
| 1 | 2u2/6V | cc_rcl:rcl-cc-0603 | C106 |
| 1 | BEAD | cc_rcl:rcl-cc-0603 | L101 |
| 1 | CC_LM75 | SOIC_Packages:SOIC-8_N | U103 |
| 1 | CC_STM32F401xE | cc_stm32package:lqfp64 | U102 |
| 1 | CC_STM32SWD | Pin_Headers:Pin_Header_Straight_1x06 | U104 |
| 1 | CC_XC6204 | SMD_Packages:SOT23-5 | U101 |
| 1 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | P108 |
| 1 | CONN_02X03 | con-harting-ml:con-harting-ml-ML6 | P109 |
| 1 | CONN_02X03 | Pin_Headers:Pin_Header_Straight_2x03 | P101 |
| 1 | LED_G | LEDs:LED-0603 | D101 |
| 1 | LED_R | LEDs:LED-0603 | D102 |
| 1 | LOGO | cc_misc:gpl3_40x16mm_2 | G*** |
| 1 | MAX3485 | cc_if-driver:if-driver-SO08 | IC101 |
| 1 | MOS_N | cc_transistor:CC_SOT23_MOS1 | Q201 |
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
227 parts, built around the MAX3485ED. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gitGNU/gnu_plussydisplay repository on GitHub, at the commit this page was made from: the board is display/pcb/ws2812display.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
gitGNU/gnu_plussydisplay
This repository contains free software and hardware design components for a small LED matrix resembling FSFE's plussy mascot. It is intended to be used, e.g., as an eyecatcher for fellowship events.
anyshake/explorer
🌏 Detecting seismic wave using 3 geophones and 3-axis accelerometer, pack & send data to AnyShake Observer over RS232 / RS485 serial.
hirakuni45/RX
Renesas RX Microcontroller, C++ framework, Library, Sample
emertcakir/OpenAirScope
Open-source air quality and environmental monitoring node with STM32H743 + ESP32-C3, LoRaWAN, RS485, USB-C, Li-ion charging, and multi-sensor support.
rmingon/rs485-spy-injector
RS485 Spy is an open-source hardware tool for real-time monitoring, logging, and testing of RS-485 networks
kim-xps12/m5stack_board_dynamixel_ttl_rs3485
When using this repository in your own environment, please import HY2.0-4P.kicadmod into the appropriate library. I import it into the global library so that it can be used from other projects as well.
