Skip to the content
2 layersFinalopt, the printed circuit board in 3D

4-bit binary calculator grew from my curiosity about digital electronics. Built without a microcontroller, it performs binary addition and subtraction using logic gates, switches, and LEDs, while documenting my journey from Proteus simulation and breadboard testing to KiCad PCB design.

Copper layers
2
Thickness
1.6 mm
Parts
10
Nets
11
Pads
20
Tracks, vias
37, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
20 Jul 2026
Updated
5 Sep 2026

Overview

Finalopt is an open-source printed circuit board by girida-alp, from the girida-alp/4-bit-Binary-Adder-subtractor repository on GitHub. It is a 2-layer board with 10 parts on 11 nets, routed with 37 tracks and 0 vias.

Its parts include 5 resistors and 5 diodes.

README

README.md

4-bit-Binary-Adder-subtractor

4-bit binary calculator grew from my curiosity about digital electronics. Built without a microcontroller, it performs binary addition and subtraction using logic gates, switches, and LEDs, while documenting my journey from Proteus simulation and breadboard testing to KiCad PCB design. Full Adder — Simulation, Schematic & PCB Design

This repository contains the complete design and implementation of a 1-bit Full Adder, including its logic simulation, KiCad schematics, PCB design, and IC footprints.

📁 Repository Contents

Full Adder Simulation

Logic simulation of the full adder Verification of Sum and Carry outputs Truth-table-based testing

KiCad Schematics

Full adder circuit schematics Logic gate and IC connections Complete circuit documentation

PCB Design

PCB layout designed in KiCad Component placement and routing Board design files ready for manufacturing

IC Footprints

Footprints for each IC used in the circuit Custom and/or KiCad library footprints Component placement references for the PCB 🧮 Full Adder

A full adder is a combinational logic circuit that adds three binary inputs:

A — First input B — Second input Cin — Carry input

It produces two outputs:

Sum Cout — Carry output

The circuit can be represented as:

Sum = A ⊕ B ⊕ Cin

Cout = AB + ACin + BCin

🛠️ Tools Used KiCad — Schematic capture, PCB design, and footprints Logic Simulation Software — Full adder simulation and verification 🎯 Project Goals

The purpose of this project is to demonstrate the complete hardware-design workflow, from digital logic simulation to schematic design, PCB layout, and physical component footprints.

📂 Project Structure Full-Adder/ ├── Simulation/ │ └── Full-Adder-Simulation │ ├── Schematics/ │ └── Full-Adder.kicad_sch │ ├── PCB/ │ └── Full-Adder.kicad_pcb │ ├── Footprints/ │ └── IC-Footprints/ │ └── README.md

📌 Project Status

Completed — simulation, schematic, PCB design, and IC footprints are included in this repository.

Parts

10
QtyValueFootprintReferences
54.7kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR10, R11, R12, R13, R14
1C4LED_THT:LED_D5.0mmD7
1S0LED_THT:LED_D5.0mmD3
1S1LED_THT:LED_D5.0mmD4
1S2LED_THT:LED_D5.0mmD5
1S3LED_THT:LED_D5.0mmD6

More from girida-alp/4-bit-Binary-Adder-subtractor

2
  • 2 layersInput, the printed circuit board in 3D

    Input

    girida-alp/4-bit-Binary-Adder-subtractor

    4-bit binary calculator grew from my curiosity about digital electronics. Built without a microcontroller, it performs binary addition and subtraction using logic gates, switches, and LEDs, while documenting my journey…

    5 parts
  • 2 layersFulladder, the printed circuit board in 3D

    Fulladder

    girida-alp/4-bit-Binary-Adder-subtractor

    4-bit binary calculator grew from my curiosity about digital electronics. Built without a microcontroller, it performs binary addition and subtraction using logic gates, switches, and LEDs, while documenting my journey…

    3 parts

Similar boards

  • 2 layers57 × 55.2 mmLogicAnalyzer, the printed circuit board in 3D

    LogicAnalyzer

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    10 parts5.1kGPL-3.0
  • 2 layers32.2 × 15.4 mmProtector, the printed circuit board in 3D

    Protector

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    10 parts4.3kMIT
  • 2 layers26 × 18 mmConn, the printed circuit board in 3D

    Conn

    yaqwsx/KiKit

    Automation tools for KiCAD

    10 parts2.1kMIT
  • 2 layers44.3 × 30.5 mmLime2-SATA RevA, the printed circuit board in 3D

    Lime2-SATA RevA

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    10 parts1.5k
  • 2 layers17.8 × 43.2 mmNano Adapter, the printed circuit board in 3D

    Nano Adapter

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    10 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    10 parts1kGPL-3.0

Questions

What parts does the Finalopt use?

10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Finalopt KiCad files?

From the girida-alp/4-bit-Binary-Adder-subtractor repository on GitHub, at the commit this page was made from: the board is finalopt.kicad_pcb and its schematic finalopt.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Finalopt design in my own project?

Its repository states no licence, so its author keeps all rights: ask girida-alp before reusing the design.