2 layers304.8 × 170.8 mm
2 layers67.9 × 43.8 mm
Shademaker
gilgen/shademakerModern minimal, programmable, and powerful automated blind system.
- Size
- 67.9 × 43.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 41
- Pads
- 94
- Tracks, vias
- 154, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 Aug 2020
- Updated
- 23 Apr 2021
Overview
Shademaker is an open-source printed circuit board by gilgen, from the gilgen/shademaker repository on GitHub. It is a 2-layer board of 67.9 × 43.8 mm with 15 parts on 41 nets, routed with 154 tracks and 0 vias.
It is built around the IRLZ44N. Its parts include 2 resistors, 1 capacitor, 1 diode, 1 transistor and 1 switch.
Main components
1README
README.mdShademaker
An open source implementation of a stepper driven automated blind system.
Required components
- Stepper motor (5:1 planetary geared)
- Arduino
- Hacked CNC shield
- 8825 stepper drivers
- Light sensor module
- Up/Down momentary switches
- On/Off toggle switch
- Relay
- 24v solenoid
- 8mm shaft couplers (no more than 16mm in diameter)
- 8mm rod
- 24v power supply
WIP
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Jumper_NO_Small | TestPoint:TestPoint_2Pads_Pitch5.08mm_Drill1.3mm | M1, M2 |
| 2 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | ., . |
| 1 | 100uf | Capacitor_THT:C_Radial_D6.3mm_H7.0mm_P2.50mm | C1 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | ARDUINO NANO | Module:Arduino_Nano | ARDUINO1 |
| 1 | BLIND | Connector_RJ:RJ45_Amphenol_54602-x08_Horizontal | RJ45 |
| 1 | D | Diode_THT:D_DO-15_P12.70mm_Horizontal | D1 |
| 1 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | I²C ADDRESS | Button_Switch_THT:SW_DIP_SPSTx05_Slide_6.7x14.26mm_W7.62mm_P2.54mm_LowProfile | SW1 |
| 1 | M0 | TestPoint:TestPoint_2Pads_Pitch5.08mm_Drill1.3mm | MO1 |
| 1 | SCREW TERMINALS | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-9-3.5-H_1x09_P3.50mm_Horizontal | SCREW1 |
| 1 | STEPPER | Module:Pololu_Breakout-16_15.2x20.3mm | STEPPER1 |
Questions
How big is the Shademaker PCB?
It measures 67.9 × 43.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Shademaker use?
15 parts, built around the IRLZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Shademaker KiCad files?
From the gilgen/shademaker repository on GitHub, at the commit this page was made from: the board is circuit/shademaker.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Shademaker design in my own project?
Its repository states no licence, so its author keeps all rights: ask gilgen before reusing the design.
Similar boards
- 2 layers94 × 79 mm
- 2 layers
Morpheus kicad
pscrespo/Morpheus-STM32
A small 3D printer controller board for use with a "blue pill" STM32F1 generic board. Inspired on http://reprap.org/wiki/SinapTec
66 parts80GPL-3.0 - 2 layers100 × 100 mm
- 2 layers157.5 × 97.8 mm
Esp32PrinterController
MitchBradley/Esp32PrinterController
PCB design for 3D printer controller using ESP32 processor
101 parts16MIT - 2 layers99.1 × 99.1 mm
- 2 layers64.8 × 109.2 mm
Dmx ledstrip dimmer-32ch
robinolejnik/dmx-ledstrip-dimmer-32ch
Arduino Mini and TLC5940 based 32 channel 12V PWM dimmer with DMX512 and RDM support.
105 parts14MIT - 2 layers101.6 × 53.3 mm
BatteryAnalyzer MkII
Moragor/BatteryAnalyzer_MkII
Updated Version of the battery analyzer, now with constant current
25 parts12MIT