

Draytronics Elise PCB V2
(Current V2) An open source 65% mechanical keyboard, designed to be physically compatible with XD68
- Size
- 303.8 × 93.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 197
- Nets
- 130
- Pads
- 799
- Tracks, vias
- 931, 42
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Aug 2021
- Updated
- 14 Aug 2021
Overview
Draytronics Elise PCB V2 is an open-source printed circuit board by ghostseven, from the ghostseven/Draytronics-Elise-PCB-V2 repository on GitHub. It is a 2-layer board of 303.8 × 93.5 mm with 197 parts on 130 nets, routed with 931 tracks and 42 vias.
It is built around the ATMEGA32U4-MU, USBLC6-2SC6 and WS2812B. Its parts include 85 diodes, 8 capacitors, 6 resistors, 2 ICs and 1 switch. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA32U4-MU
VQFN-44-EP(7x7)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH VQFN-44-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdDraytronics-Elise-PCB-V2

An open source 65% mechanical keyboard, designed to be physically compatible with XD68. More info / kits / PCB designs available at https://www.draytronics.co.uk/elise

Parts
197| Qty | Value | Footprint | References |
|---|---|---|---|
| 69 | D_Small | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +53 |
| 55 | MX-NoLED | MX_Only:MXOnly-1U-NoLED | MX1, MX2, MX10, MX11, MX12, MX13, MX15, MX17, MX18, MX19, MX20, MX21, MX22, MX23, MX24, MX25 +39 |
| 16 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D70, D71, D72, D73, D74, D75, D76, D77, D78, D79, D80, D81, D82, D83, D84, D85 |
| 6 | 1.5U | MX_Only:MXOnly-1.5U-NoLED | MX16, MX29, MX74, MX75, MX77, MX78 |
| 5 | 1.25U | MX_Only:MXOnly-1.25U-NoLED | MX32, MX48, MX64, MX65, MX66 |
| 4 | 1U | MX_Only:MXOnly-1U-NoLED | MX46, MX68, MX69, MX70 |
| 3 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3 |
| 2 | 1.75U | MX_Only:MXOnly-1.75U-NoLED | MX33, MX61 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R6 |
| 2 | 2.25U | MX_Only:MXOnly-2.25U-NoLED | MX45, MX49 |
| 2 | 22p | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | 22r | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 1 | 100r @ 100 Mhz | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1A | Fuse:Fuse_0805_2012Metric | F1 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 2U | MX_Only:MXOnly-2U-NoLED | MX14 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 6.25U | MX_Only:MXOnly-6.25U-ReversedStabilizers-NoLED | MX67 |
| 1 | 7U | MX_Only:MXOnly-7U-ReversedStabilizers-NoLED | MX76 |
| 1 | ATmega32U4-MU | Package_DFN_QFN:QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mm | U1 |
| 1 | HRO-TYPE-C-31-M-12 | Type-C:HRO-TYPE-C-31-M-12-Assembly | USB1 |
| 1 | ISO | MX_Only:MXOnly-ISO-ROTATED-ReversedStabilizers-NoLED | MX31 |
| 1 | LOGO | Draytronics Footprints:OSHQ_Copper_Back | G*** |
| 1 | LOGO | Draytronics Footprints:Logo_Elise | G*** |
| 1 | LOGO | Draytronics Footprints:QMK_Copper_Back | G*** |
| 1 | SW_Push | Draytronics Footprints:TS-1187A-B-A-B | SW1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
The 187 most common of 197 parts.
Similar boards
- 2 layers285 × 95.1 mm

- 2 layers437.9 × 148.2 mm

- 2 layers228.4 × 85 mm

LeChiffre
paindrivendev/le-yiffre
Le Yiffre is a modified hotswap Le Chiffre pcb as an experimental design with different thumb clusters.Thanks to tominabox1 for creating Le Chiffre Keyboard and making it open source.
108 parts8 - 2 layers405 × 128 mm

- 2 layers284.7 × 95.5 mm

- 2 layers285 × 95.1 mm

Voyager60
staticintlucas/Voyager60-SMK
A fork of ai03's Voyager60-Alps, adapted for SMK 2nd gen switches
198 parts2MIT - 2 layers58.5 × 77 mm

- 2 layers343.8 × 98.1 mm

Questions
How big is the Draytronics Elise PCB V2 PCB?
It measures 303.8 × 93.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Draytronics Elise PCB V2 use?
197 parts, built around the ATMEGA32U4-MU, USBLC6-2SC6 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Draytronics Elise PCB V2 KiCad files?
From the ghostseven/Draytronics-Elise-PCB-V2 repository on GitHub, at the commit this page was made from: the board is Draytronics-Elise-PCB V2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Draytronics Elise PCB V2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask ghostseven before reusing the design.